Advertisement
Quick Links
Baridi 90cm Induction Hob, 5 Cooking Zones, Boost Function,9
Settings, Slider Touch Control, 9300W
Model No. DH180
Thank you for purchasing a Dellonda product. Manufactured to a high standard, this product will,
if used according to these instructions, and properly maintained, give you years of trouble free performance.
www.dellonda.co.uk
DH180
Issue:4
19/10/22
Advertisement
Related Manuals for baridi DH180
Summary of Contents for baridi DH180
- Page 1 Baridi 90cm Induction Hob, 5 Cooking Zones, Boost Function,9 Settings, Slider Touch Control, 9300W Model No. DH180 Thank you for purchasing a Dellonda product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
-
Page 2: Specification
Important Information Please read these instructions carefully. Note the safe operational requirements, warnings & cautions. Use the product correctly and with care for the purpose for which it is intended. Failure to do so may cause damage and/or personal injury and will invalidate the warranty. Keep these instructions safe for future use. -
Page 3: Work Surface
• HOT SURFACES! RISK OF BURNS! During use the appliance becomes hot. • WARNING! Accessible parts may become hot during use. Young children should be kept away. • Never move racks or pans when they are hot. Wait until they cool. •... - Page 4 • Refer to fig.2 and fig.3 for location. fig.3 • Apply the seal strip (supplied) to the underside edge of the hob, and leave approx. 3mm from the edge of the glass. DO NOT use silicone. • Cut any excess and bring the two ends of the seal together so they match. •...
- Page 5 • CLEANING • Always disconnect the power supply prior to cleaning the appliance. If the switched fused connection unit is difficult to reach, shut off the power supply by using the corresponding circuit breaker at the distribution board. • Clean the appliance thoroughly before first use. The hob should be cleaned regularly and any food deposits removed. •...
- Page 6 • TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION The hob cannot be No power. Make sure the hob is connected to the power supply and that it is turned on. switched on. Check whether there is a power outage in your home or area. If you’ve checked everything and the problem persists, call a qualified technician.
- Page 7 • ERROR CODES ERROR CODE TYPE OF FAULT SOLUTION E4/E5 Temperature sensor failure Please contact the supplier E7/E8 Temperature sensor of the IGBT failure. E2/E3 Abnormal supply voltage Please inspect whether power supply is normal. Power on after the power supply is normal. E6/E9 Bad induction hob heat radiation Please restart after the induction hob cools down.
Need help?
Do you have a question about the DH180 and is the answer not in the manual?
Questions and answers