Advertisement
Package Lists
Item
WAGM51W6 XGSPON ONT Unit
Power Adapter
RJ-45 Ethernet Cable
User Manual
Product Overview
The WAGM51W6 is an ITU-T G.988 and ITU-T G.9807.1 XGSPON compliant ONT. The ONT
provides customer with four GE ports, one 10G port, 1 USB port, 1 POTS port, Wi-Fi 802.11ax
2.4GHz& 802.11ax 5GHz concurrent. Its characteristics of high bandwidth and low latency can
meet the needs of high-end home users. And it supports desktop mounting or wall mounting.
Interface
Device Interface
Fiber Optical interface
LAN
Power
Phone
USB
XGSPON
WAGM51W6
User Manual
Quantity
1
1
1
1
Description
1*SC/APC optical interface for fiber connection.
Supports XGSPON (Transmitting: 1270nm,
Receiving: 1577 nm )
4*GE Ethernet supports10/100/1000-Base-T, 1*10GE
supports 100/1000/10000-Base-T, interface with
RJ-45 connector,full duplex and flow control, auto
negotiation or manual configuration
and supports MDI/MDIX auto-sensing
12V Power Input Interface
1* DC Jack for power input
1*POTS interfaces with RJ-11 connector
1*USB 2.0 port
Advertisement
Table of Contents
Summary of Contents for Azores Networks XGSPON WAGM51W6
- Page 1 XGSPON WAGM51W6 User Manual Package Lists Item Quantity WAGM51W6 XGSPON ONT Unit Power Adapter RJ-45 Ethernet Cable User Manual Product Overview The WAGM51W6 is an ITU-T G.988 and ITU-T G.9807.1 XGSPON compliant ONT. The ONT provides customer with four GE ports, one 10G port, 1 USB port, 1 POTS port, Wi-Fi 802.11ax 2.4GHz&...
-
Page 2: Technical Specification
Technical Specification Item Description Dimension 40mm×220mm×160mm (Height×Width×Depth) Rated Voltage Rated Current 2.5A Operation Temperature 0ºC to 45ºC Storage Temperature -20ºC to 65ºC Safety Instructions Please read the safety instructions carefully before using the device. 1. Please keep the power adapter and cables and hands clean and dry to avoid the electric shock and other dangers. -
Page 3: Cable Connection
Cable Connection Connect Ethernet Cable If needed, connect LAN port of WAG-M51W6 to PC via standard RJ-45 Ethernet Cable. Connect Fiber Optical Cable Connect the fiber optical port of WAG-M51W6 (at the bottom of the device) to XGS-PON OLT via fiber optical cable. Connect Power Adapter Connect the power interface of WAG-M51W6 to a power outlet via the provided power adapter (Please don’t use other specifications of power adapter), then turn on the power switch of... - Page 4 Color State Description The device is powered off. Power Green The device is powered on. The device has not started the registration process. XGS-PON Green Flashing The device is registering. The device has completed the registration process. The received XGS-PON optical power is normal.
-
Page 5: Troubleshooting
The device is unable to register on the soft switch/IMS. Flashing Voice service is being provided. Phone Green The device has registered on the soft switch/IMS but no voice service. USB device not connected. Green USB device connected. Buttons Button Function Power Button Power on and off the WAGM51W6 device. - Page 6 · The optical fiber cable is not connected to ONT XGSPON devic e correctly. · Please contact the service provider if the LED is flashing red.
-
Page 7: Fcc Caution
FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. - Page 8 IC Warning This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Need help?
Do you have a question about the XGSPON WAGM51W6 and is the answer not in the manual?
Questions and answers