GigaTent POP UP POD ST006 Manual

ASSEMBLY INSTRUCTIONS

1. Confirm product contents by emptying contents of bag(s) and confirming all parts are included and undamaged.
2. Select a smooth level site prior to opening the structure.
3. Pull frame apart to pop open structure.
   
   Structure has inner steel wire which may spring open suddenly while attempting to open.
   TIP: Frame may need minor adjustment when tent is set up. Gently bend frame into shape if sagging appears.
4. Stake down structure on bottom four corners.
   It is strongly recommended to attach supplied guylines at the corners near the top of structure and stake down to the ground.

DISASSEMBLY INSTRUCTIONS

1. Pick up the structure and lay it on its side.
2. Grasp the top of frame and push one of the corners INTO the structure towards the OPPOSITE corner.
3. The structure will now fold flat.
4. Grasp 2 DIAGONALLY OPPOSITE corners and bring them together in one hand. (You now have a loop above and below your hand)
5. Kneel down and place the bottom loop on the ground.
6. Grasp the outer edge of the top loop furthest away from you and fold inward toward the lower loop and lay flat on the ground. (You now have 2 loops on top of a larger one)
7. Slide one of the smaller loops over the one next to it and grasp the outside edges of the entire folded playhouse.
8. Slowly move your hands around the outside edges to make all of the loops the same size.
9. Place folded structure into carry case.

We strongly suggest setting up your new tent before going camping to insure that all parts are present and to familiarize yourself with the tents assembly. This will have a great effect on how well you enjoy your camping trip.