Related Manuals for Aratek BM5510
Summary of Contents for Aratek BM5510
- Page 1 Fingerprint smart terminal BM5510 User’s Manual V1.2 ShenZhen Aratek Biometrics Technology Co.,Ltd. - 1 -...
- Page 2 1. Warm Tips (1) The manual is subject to change without prior notice. (2) The manual is a general guide for the device. Functions might be increased or reduced due to customized needs. Please contact local distributor for details. 2. Warning ★...
- Page 3 b). Sides of the device (2). Components Name Function Sensor Place finger on capture area to capture - 4 -...
- Page 4 fingerprint Indicator light Display working state Receiver* Listen to the sound (optional) MIC * Collect sound（optional） Camera* 2 mega pixel (optional) Flashlight LED flashlight Loudspeaker Broadcast or call Volume button+ Volume up Volume button- Volume down TF card slot 32G flash memory support Headphone port 3.5mm Power switch...
- Page 5 Touch screen capacitive touch screen 1G RAM SIM card* Optional Data Onboard 8G ROM Expansion TF Card（up to 32G) Camera Rear 2 mega pixel Decoder Support 2.1 sound output Built-in Mic* Quantity: 1 Audio Receiver Optional Speaker Stereo Speaker Headphone port 3.5mm Mirco USB Quantity: 1...
- Page 6 Extensive function* Built-in QR Code (Optional) Working temperature: 0℃～70℃ Operating environment Relative humidity ≤90% Storage and transportation temperature -40～60℃ Support Antenna energy output ★ ： Antenna surface magnetic field strength (Hmax) ≤7.5A/m(rms) Electromagnetic field strength at the 3cm of the antenna surface Radio frequency Specification* normal direction...
- Page 7 c. Disconnect the device and unplug charger after use. d. If no in use for long period, battery may cause hibernation. Battery should be kept in dry environment with full charge. Charge and discharge once every 3 to 6 months is recommended.
- Page 8 (6) No throw, beat or vibration allowed, because that will damage the inner circuit board and its precision architecture. (7) Do not clean the device with strong chemicals, cleaning agents and strong detergents. (8) Do not paint the device because paints affect detachable parts work smoothly. (9) The charger is for indoor use only.
- Page 9 The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: BM5510 (FCC ID: 2AGUJ-BM5510) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 1.079W/kg and when properly worn on the body is 1.197W/kg.
Need help?
Do you have a question about the BM5510 and is the answer not in the manual?
Questions and answers