Related Manuals for Bell'O BMA-3036-AL
Summary of Contents for Bell'O BMA-3036-AL
- Page 1 LED Lighted Medicine Cabinet V12 R2.1 Installation and Operating Manual Please do not return the product to the store. Contact us with any questions. Call us : 800-498-4042 E-mail : info@bellousa.com...
-
Page 2: Model Specification
• Anti Fog • Built-in 2 sockets and USB • Clock Display • Front and Backlit • Adjustable 10X Magnifying Mirror • Equipped with GFCI Dimension Color Door Type BMA-3036-AL 30"×36" Aluminum 2 Doors 18"+12" BMA-3636-AL 36"×36" Aluminum 2 Doors 22"+14" BMA-4836-AL 48"×36"... - Page 3 LED Lighted Medicine Cabinet Note For easy and safe installation, please refer to the following: Read all instructions thoroughly before installing the enclosed product. Read and take note of all Safety Precautions, care and maintenance information. PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE DURING PRODUCT OPERATION AND MAINTENANCE.
-
Page 4: Warning And Safety Instructions
LED Lighted Medicine Cabinet WARNING AND SAFETY INSTRUCTIONS Before installing your LED Medicine Cabinet, please make sure that you carefully read through this instruction sheet, refer back to them during installation to ensure your product is fitted safely and correctly. Keep the instruction for future use. WARNING Risk of Fire and Electric Shock ●... -
Page 5: Parts Supplied
LED Lighted Medicine Cabinet PARTS SUPPLIED Z- Mounting Bar Z-Supporting Hook Side Mirror ×1 ×2 ×2 Wire Cap Spare Support Anchors A ×3 ×2 ×4~8 Anchor B &Z- Anchors B Side Panel Hook Screws ×6~14 Screws ×8 ×6~14 Hinge Buffers Shelves ×1~3 ×2~9... -
Page 6: Tools Required
LED Lighted Medicine Cabinet TOOLS REQUIRED Drill Pencil Level Safety Glasses Tape Gloves Drill Bit Phillip Hammer 8mm(5/16”) Screw Driver Call us : 800-498-4042 E-mail : info@bellousa.com... -
Page 7: Installation Instruction
LED Lighted Medicine Cabinet Installation Instruction The medicine cabinet supports two installation methods: 1.Surface Installation 2.Embedded Installation Please choose the installation way as needed. Some cabinet doors will be separated from the cabinet to reduce packaging volume. Please install the cabinet door after completing the cabinet installation according to the instruction. - Page 8 LED Lighted Medicine Cabinet Before installing the medicine cabinet, please remove cabinet doors first. This will make the installation easier and more convenient. Certainly, you can proceed with the installation directly, just be careful during installation to avoid any door collisions. 1.
- Page 9 LED Lighted Medicine Cabinet 2. Turn the adjustment screw in the picture clockwise to the end to prevent the hinge from disassembling and hitting the cabinet. adjustment screw 3. Then, press the end of the hinges and detach the cabinet door. Call us : 800-498-4042 E-mail : info@bellousa.com...
- Page 10 LED Lighted Medicine Cabinet Surface Installation Instruction Verify minimum clearances Minimum STEP 1 H is the total height of the medicine cabinet, and W is the total width of the medicine cabinet STEP 2 Call us : 800-498-4042 E-mail : info@bellousa.com...
- Page 11 LED Lighted Medicine Cabinet Surface Installation Instruction Secure the bar with Flat head screws STEP 3 STEP 4 Side Panel Installation White wire(Neutral) Ground wire(Green） Black wire(Hot） 3-Wire caps STEP 6 STEP 5 The side panels and cabinets are individually packaged , you need follow the STEP 5 to install the side panels for surface mounting, for embedded installation no need install the side boards.
- Page 12 LED Lighted Medicine Cabinet Surface Installation Instruction Place the support angle on the bottom of the Lift the cabinet and slide it down cabinet and mark hole location on the wall. Drill over the mounting bar. hole and insert anchor where needed. Fix the Make sure the hooks engage the bar.
- Page 13 LED Lighted Medicine Cabinet Surface Installation Instruction Rules for Selecting Anchors Installing on Drywall: • Use Anchors A to ensure a secure installation on drywall. • Anchors A are designed to provide adequate support on drywall. Installing on Studs: • Use Anchors B for a stronger installation.
- Page 14 LED Lighted Medicine Cabinet Step10：Cabinet Door Installation 1.Insert the hinges to the base ,then connect the doors with the cabinet 2. Turn the adjustment screw counterclockwise as shown in the picture to adjust the gap between the door and the cabinet. Adjust gap between door and cabinet Call us : 800-498-4042...
- Page 15 LED Lighted Medicine Cabinet Step10：Cabinet Door Installation 2. Turn the adjustment screw as shown in the picture to adjust the gap between the door and the cabinet. Adjustment screw A Adjustment screw B Adjustment screw A: Adjust the gap and vertical alignment between the door and the door frame.
- Page 16 LED Lighted Medicine Cabinet Step10：Cabinet Door Installation 3.Insert the wire on the door into the terminal on the cabinet and tighten the screw Call us : 800-498-4042 E-mail : info@bellousa.com...
- Page 17 LED Lighted Medicine Cabinet Step10：Cabinet Door Installation 4.Insert the buffer to the hinge. Ensure the buffer is facing the cabinet door. NOTE: Only one buffer is needed per door. If a door has three hinges, install the buffer on the middle hinge; if a door has two hinges, install the buffer on the bottom hinge.
- Page 18 LED Lighted Medicine Cabinet Embedded Installation Instruction Before installing, it is necessary to determine the opening size, which can be referred to in the table below. Wall opening dimensions for embedded Actual cabinet installation all in Inches. Dimensions W（Width） H（Height） D（Depth）...
- Page 19 LED Lighted Medicine Cabinet Embedded Installation Instruction Determine the size of the opening White wire(Neutral) Ground wire(Green） Black wire(Hot） 3-Wire caps STEP 2 STEP 1 STEP 2 STEP STEP 3 STEP 4 *All diagrams are for reference only.All model dimensions and proportion position will vary.
- Page 20 LED Lighted Medicine Cabinet Step5：Cabinet Door Installation 1.Insert the hinges to the base ,then connect the doors with the cabinet 2. Turn the adjustment screw counterclockwise as shown in the picture to adjust the gap between the door and the cabinet. Adjust gap between door and cabinet Call us : 800-498-4042...
- Page 21 LED Lighted Medicine Cabinet Step5：Cabinet Door Installation 2. Turn the adjustment screw counterclockwise as shown in the picture to adjust the gap between the door and the cabinet. Adjustment screw A Adjustment screw B Adjustment screw A: Adjust the gap and vertical alignment between the door and the door frame.
- Page 22 LED Lighted Medicine Cabinet Step5：Cabinet Door Installation 3.Insert the wire on the door into the terminal on the cabinet and tighten the screw Call us : 800-498-4042 E-mail : info@bellousa.com...
- Page 23 LED Lighted Medicine Cabinet Step5：Cabinet Door Installation 4.Insert the buffer to the hinge. Ensure the buffer is facing the cabinet door. NOTE: Only one buffer is needed per door. If a door has three hinges, install the buffer on the middle hinge; if a door has two hinges, install the buffer on the bottom hinge.
- Page 24 LED Lighted Medicine Cabinet Operating Manual Inside Sockets with USB GFCI Touch Switch ⚫ Setting the light & Defogger The buttons turn blue when connected to the main power supply and turn white after a brief touch. Optional to be wired to wall switch by ON/OFF memory function. ⚫...
-
Page 25: Setting The Clock
LED Lighted Medicine Cabinet ⚫ Setting the clock - Fist, Briefly touch the button to make sure the button blue light is on. - Press and hold the Button for seconds, the “Hour” will flash, then briefly touch button to set Hour. - Wait for seconds after setting up the Hour then it will automatically switch to the Minute adjustment mode. - Page 26 LED Lighted Medicine Cabinet ⚫ Magnifying Mirror ⚫ The magnifying mirror can be placed anywhere within the illuminated area on the inside mirror of the door, allowing you to adjust its position according to your preferences. ⚫ The lighting of the magnifying mirror is synchronized with the lighting of the medicine cabinet in terms of brightness and color temperature, and it can be adjusted through the touch switch on the door.
Need help?
Do you have a question about the BMA-3036-AL and is the answer not in the manual?
Questions and answers