(like concrete and brick), and this work should be done by a qualified contractor. PAR TS LIS T These instructions are for Anthro’s eNook® Pro. Before beginning assembly, please take a moment to review the parts list below to verify that your shipment is complete. Product...
Page 3
14.75" standing height is about 42" high. 23" ¡ For the 36w eNook Pro, measure up 14-3/4" from the shelf location and mark that point on one stud. For the 28w eNook Pro, measure up 14-1/4" from the shelf location and mark that point on one stud.
Page 4
To help you visualize where eNook will be on your wall, use the eNook Frame as a template. Questions? Call us at 800.325.3841 or visit anthro.com. We’re happy to walk you through the assembly!
Page 5
STEP 8 Install one TOGGLER™ for Drywall Installation ¡ Drill 1/2” diameter hole in your wall at the mounting point. ¡ Insert a TOGGLER into a hole, metal end first. ¡ Pull the plastic ring end so the metal channel rests flush behind the wall.
Page 6
Rail with the hole array at the bottom of the Back Frame. Attach using two more 3/8" Phillips screws. ¡ If you have a second Monitor Rail, install it now. 3/8" Phillips Hd Screw 325-5150-00 Questions? Call us at 800.325.3841 or visit anthro.com. We’re happy to walk you through the assembly!
Page 7
STEP 1 3 - THI S S T E P R E QU I R ES T WO PEO PLE Attach Main Unit to Frame NOTE: eNook Pro can be installed at your choice of depth: 7.25" or 8.25" deep. Determine the desired depth before beginning this step.
Page 8
Notices: Technology Furniture and eNook are trademarks of Anthro Corporation. Patent Pending. Anthro reserves the right to modify the design and specifications without prior notice. Questions? Call us at 800.325.3841 or visit anthro.com. We’re happy to walk you through the assembly!
Need help?
Do you have a question about the eNook Pro and is the answer not in the manual?
Questions and answers