D-Link DCS-930L Manual

CONTENTS OF PACKAGING

SYSTEM REQUIREMENTS

• Computer with Microsoft Windows ® 7, Vista ®, or XP
• PC with 1.3GHz or above; at least 128MB RAM
• Internet Explorer 6 or above, Firefox 3.5 or above, Safari 4 or above, Chrome 2 or above
• Existing 10/100 Ethernet-based network or 802.11n wireless network

PRODUCT SETUP

setUP WiZarD

1. Connect the included Ethernet cable to the network cable connector located on the bottom panel of the DCS-930L and attach it to the network.
2. Attach the external power supply to the DC power input connector located on the bottom panel of the DCS-930L and connect it to your wall outlet or power strip. Power is confirmed when the green LED Power Indicator located below the lens is lit.
3. Insert the DCS-930L Driver CD in the CD-ROM drive. If the CD Autorun function does not automatically start on your computer, go to Start > Run. In the run box type D:\autorun.exe (where D: represents the drive letter of your CD-ROM drive) and click OK. When the autorun screen appears, click Install and follow the on-screen instructions.
4. Click on the Start button to start the wizard, and follow the instructions from the Installation Wizard to finish setting up your camera.

WPS SETUP

Alternatively, you may create a WPS connection if your router or access point supports WPS. To create a WPS connection:

1. Press and hold the WPS button on the side of the camera for three seconds. The blue WPS status LED above the button will blink.
2. Press the WPS button on your wireless router or access point within 60 seconds. On some routers, you may need to log into the web interface and then click an onscreen button to activate the WPS feature. If you are not sure where the WPS button is on your router or access point, please refer to your router's user manual.

The DCS-930L will automatically create a wireless connection to your router. While connecting, the green LED will flash and your camera will reboot.

mydlink PORTAL

After registering your DCS-930L camera with a mydlink account in the Camera Installation Wizard, you will be able to remotely access your camera from the www.mydlink.com website. After signing in to your mydlink account, you will see a screen similar to the following:

1. Open Internet Explorer and go to http://www.mydlink.com, then sign into mydlink.
2. Select your camera from the device list, and your camera's Live View will appear.

teCHNiCal sUPPOrt
United Kingdom (Mon-Fri) website: http://www.dlink.co.uk ; FTP: ftp://ftp.dlink.co.uk
Home Wireless/Broadband 0871 873 3000 (9.00am–06.00pm, Sat 10.00am-02.00pm)
Managed, Smart, & Wireless Switches, or Firewalls 0871 873 0909 (09.00am- 05.30pm)
(BT 10ppm, other carriers may vary.)
Ireland (Mon-Fri)
All Products 1890 886 899 (09.00am-06.00pm, Sat 10.00am-02.00pm)
Phone rates: €0.05ppm peak, €0.045ppm off peak times