Pantone PT-WH008U Quick Start Manual

WIRELESS HEADPHONE
PRODUCT OVERVIEW
1.
: Press to increase volume level.
Double click to play next song
2.
: Press and hold to turn headphone
on/off. Press to answer an incoming
call or pause song.
3.
: Press to decrease volume
level. Double click to play
previous song
4.
LED indicator: Flashes white/green when in pairing mode.
LED indicator will turn off when successfully paired.
Lights up green during charging and turns off when fully charged.
5.
USB charging port: Connect the supplied USB-C cable to the port and the
other end to a power source.
6.
AUX port: connect the supplied 3.5mm audio cable to the port and the
other end to your audio device for music playback.
7.
Microphone
OPERATION
Power on and pair with a Bluetooth Device
Press and hold the
flash white/green, indicating it is ready to pair with a Bluetooth device.
Turn your smart phones Bluetooth on and select "PT-WH008" on the list of available
devices. Once successful, you will hear a notification sound and the LED
status indicator will turn off. Music from your smart phone will now be played
through the headphones.
Press the
Double click to play next song
Press the
Double click to play previous song
Bluetooth Call and Voice Assistant Function
Once successfully connected to your smart phone, you can answer/reject
incoming phone calls. Press the
Press and hold the
Press the
Press the
You can also press and hold the play/pause
for 2 seconds to command Siri or Google assistant of your smart phone.
AUX Mode
Connect the supplied 3.5mm audio cable to the AUX port of the headphones
and the other end to your audio device. The headphone will automatically
switch to AUX mode and power off.
Power Off and Charging
When the battery is low, a voice prompt will be heard. Connect the supplied USB-C
charging cable to the USB-C port and the other end to a USB power source. The LED
status indicator will light up green during charging and turn off when fully charged.
Press and hold the
device, it will automatically power off after 5 minutes.
TROUBLESHOOTING
Problem
Cannot hear audio
through headphones
Headphone not charging
Cannot connect to
smart phone
SPECIFICATIONS
Power input
Playback time
Charging time
Battery
Frequency band
Operating frequency
Dimensions (L) x (D) x (H)
Weight
button on the headphone. The LED status indicator will
button to increase volume level.
button to decrease volume level.
button to answer an incoming call.
button to reject the call.
button to decrease volume level.
button to increase volume level.
button to power off the headphones. If not paired with a Bluetooth
•
Ensure the headphones are paired with your smart phone,
the LED indicator will flash white/green slowly.
•
Increase the volume.
•
Power off your headphones then power them on
and pair with your smart phone agian.
•
Ensure you are connected to a USB power source.
•
Ensure headphone is on before pairing.
Ensure your smart phone's Bluetooth is turned on.
Please power off headphones and start again.
5VDC, 200mA
12 hours*
2-2.5 hours
3.7V 250mAh
2.4Ghz band (2.4000GHz-2.4835GHz)
Bluetooth: 2,400MHz-2,483.5MHz
171 x 82 x 197mm
175g
PT-WH008U, PT-WH008P, PT-WH008L, PT-WH008N
1
2
3
4
5
6
7
button on the headphone
Solution
*
12 hours of playback
time is based on volume
no higher than 80%