Summary of Contents for JMC ROKKER XXR
- Page 1 JMC ROKKER 400W Amplifier Kit For 2006-2013 Harley®Ultra/ Street/ Electra Glide Fairing JAMP-400HC06 Installation and Operation Instructions...
-
Page 2: Installation Instructions
2 ohm load @ 14.4vdc. all necessary mounting hardware & complete installation/ operation instructions. The ROKKER XXR amplifier’s settings have been dialed in Amplifier itself measures 7 1/4” X 4 ¾” X 1 ¾”. & optimized for this exact speaker configuration, to provide the maximum highway performance for your Harley bagger audio system. - Page 3 Fig. C Fig. D loosen remove 8. Make Amplifier/Speaker connections according to Fig. E Power Harness diagram. (Figure E) FOR ULTRA’S AND MODELS WITH A CB AND/OR SAT RADIO, CONTINUE WITH STEPS (9) THRU (11), FOR BIKES WITHOUT A CB OR SAT RADIO, PROCEED TO STEP (12). 9.
-
Page 4: Specifications
Fig. G Specifications ROKKER® XXR 400w RMS S/NRatio Full Range Class D Amplifier Separation >88dB Output Power (RMS) @ 1.5% THD 1000Hz 14.4V Input Sensitivity .35V - 3.9V Stereo @ 2ohms 2 x 200 watts RMS Continuous Frequency Response -3dB 20Hz - 31kHz Capable Input Impedance Important Programing Note: The amplifier gain &... -
Page 5: Warranty Registration Form
WARRANTY AND REPAIR INFORMATION TWO YEAR LIMITED WARRANTY In order to facilitate the servicing of this warranty, the Warranty Registration Form should be filled out and returned within 10 days of the date of purchase. However, return of the Warranty Registration Form is not a precondition of this warranty, and this Warranty will be observed by J&M CORPORATION whether or not the Warranty Registration Form is returned, on the condition that other satisfactory evidence of the date of the original purchase is provided to J&M CORPORATION.
Need help?
Do you have a question about the ROKKER XXR and is the answer not in the manual?
Questions and answers