Do you have a question about the GRAIN-WATCH GW200 and is the answer not in the manual?
Questions and answers
Summary of Contents for Liros GRAIN-WATCH GW200
Page 1
® GRAIN-WATCH SYSTEMS with Hand Instrument with Hand Instrument INSTALLATION/USER MANUAL AB LIROS ELECTRONIC A719A01 GW200manualENG071115.cdr...
When the GW200 is used for silo distributed throughout the entire length of storages, it usually interfaces to the silo. GWSL1000/2000 sensorlines which are suspended in the ceiling of the silo and A719A01 GW200manualENG071115.cdr AB LIROS ELECTRONIC...
32. grain is filled and emptied, short sensor- The maximum total cable length lines could also be used in flat storage between the spears and to the instead of sensor-spears. acquisition point, not including the A719A01 GW200manualENG071115.cdr AB LIROS ELECTRONIC...
The junction box should be placed on top of the silo, as close to the sensor-lines connected to it as possible. Sensor-Line Sensor-Line Sensor-Line JB-05 Signal (+) Jack Plug 0V (-) Junction Box JB-05 Junction Box JB-05 Jack plug at acquisition point Sensor Lines A719A01 GW200manualENG071115.cdr AB LIROS ELECTRONIC...
ATEX approved. GWBA01 +5VNET 0V(-) to sensor-lines or junction boxes 3,5mm jack plug at DNET Signal (+) to sensor-lines or junction boxes acquisition point See also the installation manual for the GWBA01 for more details. A719A01 GW200manualENG071115.cdr AB LIROS ELECTRONIC...
In case you need to contact LIROS regarding troubleshooting or service, make sure to have the version number of the internal software available - See 3.1 above. 4. TECHNICAL DATA Item...
Need help?
Do you have a question about the GRAIN-WATCH GW200 and is the answer not in the manual?
Questions and answers