Table of Contents
Advertisement
Using your KODAK Webcam
To use your KODAK Webcam as a Plug & Play device with the VOIP and instant
messenger application you have installed on your computer, follow these easy
instructions:
1.
Connect and plug the USB cable attached to the webcam into an available USB
2.0 slot on your computer.
2.
Your KODAK Webcam will power on and the LED will light up.
3.
The first time you plug your webcam into the computer, wait a few moments for
the computer to recognize your KODAK Webcam.
4.
Place the KODAK Webcam on a flat and sturdy surface and swivel the lens in the
direction of the object you wish to capture.
5.
Alternatively, perch and position your KODAK Webcam on any LCD monitor by
opening and adjusting the clamp on the base of the webcam.
6
Advertisement
Table of Contents
