Summary of Contents for EM-Technik 7G300FF181818PP
- Page 1 Injector 7G300 Assembly and Operation Instructions EM-Technik GmbH - Industriestraße 2 - 67133 Maxdorf - Germany em-technik.com info@em-technik.com...
-
Page 2: Table Of Contents
6 Maintenance ................................. 8 7 Disposal ................................8 8 Return Delivery ..............................8 9 Troubleshooting / Fault Rectification ........................ 9 10 Manufacturer‘s Declaration ..........................9 11 Contact ................................. 9 EM-Technik GmbH - Industriestraße 2 - 67133 Maxdorf - Germany em-technik.com info@em-technik.com... -
Page 3: General Information
• Components should only be retrofitted after consulta- out of the line or remaining in dead spaces. tion with the manufacturer. EM-Technik GmbH - Industriestraße 2 - 67133 Maxdorf - Germany em-technik.com info@em-technik.com... -
Page 4: Manufacturer's Specification
• Avoid UV radiation and direct sunlight. • Leave the fitting in its original packaging to ensure the best possible protection. • Dispose of the packaging material according to dispo- sal requirements/environmental protection regulations. EM-Technik GmbH - Industriestraße 2 - 67133 Maxdorf - Germany em-technik.com info@em-technik.com... -
Page 5: 7G300Mf
• The motive gas must not be abrasive, as this could da- mage the nozzle. • If you have questions about resistance please contact emtechnik. • For the maximum permitted operating pressure/tempe- rature see the pressure guide. EM-Technik GmbH - Industriestraße 2 - 67133 Maxdorf - Germany em-technik.com info@em-technik.com... -
Page 6: 7G300Ff181818Pp
70±14.29% 2035±2.7% 3675±3.4% 105±4.76% 2365±1.48% 4035±3.35% 130±7.69% 2715±1.66% 4325±2.89% 170±5.88% 3060±1.96% 4600±3.26% 205±2.44% 3405±2.79% 4795±2.19% 235±6.38% 3735±3.08% 5040±3.17% 265±5.66% 4100±2.44% 5205±3.94% 295±5.08% 4425±2.82% 5390±4.27% 320±6.25% 4790±2.92% 5535±3.88% 360±5.56% EM-Technik GmbH - Industriestraße 2 - 67133 Maxdorf - Germany em-technik.com info@em-technik.com... -
Page 7: 7G300Ff143838Pv,7G300Ff383838Pv, 7G300Mf143838Pv, 7G300Mf383838Pv
• The Injector has female/male G-threads according to DIN ISO 228-1 and can be connected with various con- necting elements of the emtechnik system. EM-Technik GmbH - Industriestraße 2 - 67133 Maxdorf - Germany em-technik.com info@em-technik.com... -
Page 8: Fastening Options
Injector Art.-No. Injektor Art.-No. 7G300FF181818xx 7G300FF181818xx 2x 3S0050PE5 7G300xFxx3838xx 6L034PP6 7G300xFxx3838xx 2x 3S0034PEB3 EM-Technik GmbH - Industriestraße 2 - 67133 Maxdorf - Germany em-technik.com info@em-technik.com... -
Page 9: Troubleshooting / Fault Rectification
Improper installation or assembly. Just as well as inap- propriate use, dismantling or modification. • Failure to observe information provided here may lead to injuries, material damage, malfunctions and impuri- ties due to escaping medium. EM-Technik GmbH - Industriestraße 2 - 67133 Maxdorf - Germany em-technik.com info@em-technik.com...
Need help?
Do you have a question about the 7G300FF181818PP and is the answer not in the manual?
Questions and answers