O P E R ATI NG MAN UAL EVOLUTION HEATED RETAIL DISPLAY CABINET MODEL NUMBERS SEH60ED1 • SEH60SW • SEH60SPD1 • SEH90ED1/2 • SEH90SW • SEH90SPD1/2 SEH120ED2 • SEH120SW • SEH120SPD2 • SEH150ED2 Caution: This manual must be read and understood before your appliance is installed, and operated.
1. INTRODUCTION Thank you for buying a Victor product. Many years of satisfactory use from your purchase can be expected, if the operating, cleaning and maintenance instructions are followed, however failure to do so may affect the warranty. This manual contains instructions for the safe installation, operation and maintenance of the Victor product, model as stated on the front cover.
2.4. TURNING THE FANS ON AND OFF This unit utilises fans to ensure the heated air is circulated evenly around the unit, and the product. It is recommended that the fans are always turned on for best results. The fan can be turned off if not required by selecting the Fans switch off position. 2.5.
3.1. CLEANING UNDER THE SHELF AND BASE COVERS Do not do this until the unit has been unplugged and allowed to cool. The covers over the shelves and base heating area are designed to be removable for cleaning. Removing the Shelf and Base Covers (a) Each Cover plate can be removed for cleaning and allow access to clear around the elements.
The Victor Manufacturing Ltd warranty does not affect any legal rights you have against the person who supplied your Victor Manufacturing Ltd goods or any other legal right against Victor Manufacturing Ltd under the laws of the United Kingdom - it is an addition to those rights.
6. ENVIRONMENTAL CONDITIONS This appliance contains electrical components and should be used and stored indoors only under the conditions listed in the table below. Environmental Temperature (Storage) -5°C - 35°C Relative Humidity (Storage) Max. 80% up to 31°C decreasing linearly to 50% at 40°C Temperature (Operation) 16°C to 25°C Relative Humidity (Operation)
(Body Width - BW) than the rear (Overall Width - W). • If fitting a wall style unit to a counter an aperture/cover will be required to access the controls (please contact Victor Manufacturing for details).
The most common spare parts and their order codes are listed in the following tables. If you are unsure of your Victor product model number check your data label and Section 8 of this manual.
Page 9
Spares order codes 900mm wide units SEH90ED1 SEH90ED2 SEH90SPD1 SEH90SPD2 SEH90SW Heating Element (Deck) 22-0390 22-0390 22-0390 22-0390 22-0390 Heating Element (Shelf ) 22-0390 22-0390 22-0390 22-0390 22-0390 Rocker Switch (Red) 24-0040 24-0040 24-0040 24-0040 24-0040 LED Light Bar 26-0159 26-0159 26-0159 26-0159...
Page 10
Spares order codes 1200/1500mm wide units SEH120ED2 SEH120SPD2 SEH120SW SEH150ED2 Heating Element (Deck/Shelf - Large) 22-0391 22-0392 22-0392 22-0390 Heating Element (Deck/Shelf - Small) 22-0389 Rocker Switch (Red) 24-0040 24-0040 24-0040 24-0040 LED Light Bar 26-0159 26-0159 26-0159 26-0159 (260mm) 26-0162 (830mm) LED Interconnecting Lead 26-0175...
• Emergency Warranty Tel No: 07876 898114 (All other times) Warranty repairs are carried out between 9.00am and 5.00pm Monday - Friday. Access required outside normal working hours may incur charges. Registered Office: Victor Manufacturing Ltd Prospect Works, Off South Street, Keighley BD21 5AA Tel: 01274 722125 Email: sales@victormfg.co.uk...
I hereby declare that the equipment named above has been designed to comply with the relevant sections of the above referenced specifications and is in accordance with the applicable Essential Requirements of the Directives. The Technical Documentation for the above named machinery is available from Victor Manufacturing Ltd at the above address. Signed:...
Need help?
Do you have a question about the SEH60ED1 and is the answer not in the manual?
Questions and answers