Download
Share
Print this page
Cisco Catalyst 3750-E Hardware Installation Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Switch
  5. Catalyst 3750-E Series
  6. Hardware installation manual
Cisco Catalyst 3750-E Hardware Installation Manual

Cisco Catalyst 3750-E Hardware Installation Manual

Hide thumbs Also See for Catalyst 3750-E:

Advertisement

Quick Links

Download this manual
Catalyst 3750-E and Catalyst 3560-E
Switch Hardware Installation Guide
July 2008
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Text Part Number: OL-9774-04

Advertisement

loading
Need help?

Need help?

Do you have a question about the Catalyst 3750-E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Cisco Catalyst 3750-E

Summary of Contents for Cisco Catalyst 3750-E

  • Page 1 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide July 2008 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: OL-9774-04...
  • Page 2 You can determine whether your equipment is causing interference by turning it off. If the interference stops, it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment causes interference to radio or television reception, try to correct the interference by using one or more of the following measures: •...
  • Page 3 1-15 24- and 48-Port Switch Power-Supply Modules 1-15 Catalyst 3560E-12D and 3560E-12SD Switch Power-Supply Modules 1-16 Fan Modules 1-17 RPS Connector 1-19 Management Ports 1-20 Management Options 1-20 Network Configurations 1-21 Catalyst 3750-E and 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 4 Mounting the Catalyst 3560E-12D Switch on a Wall 2-16 Table- or Shelf-Mounting 2-17 After Installing the Switch 2-17 Connecting to the StackWise Ports (Catalyst 3750-E Switches) 2-18 Installing Devices in the 10-Gigabit Ethernet Slots 2-19 Installing X2 Transceiver Modules and Converter Modules 2-19...
  • Page 5 A P P E N D I X Connector and Cable Specifications A P P E N D I X Connector Specifications 10/100/1000 Ports 10-Gigabit Ethernet Module Interfaces SFP Modules 10/100 Ethernet Management Port Console Port Catalyst 3750-E and 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 6 Accessing the CLI Through Express Setup Accessing the CLI Through the Console Port Connecting to the Console Port Entering the Initial Configuration Information IP Settings Completing the Setup Program N D E X Catalyst 3750-E and 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 7 Preface Audience This guide is for the networking or computer technician responsible for installing Catalyst 3750-E and Catalyst 3560-E switches. We assume that you are familiar with the concepts and terminology of Ethernet and local area networking. If you are interested in more training and education in these areas, learning opportunities including training courses, self-study options, seminars, and career certifications programs are available on the Cisco Training &...
  • Page 8 Statement 1071 Related Publications Before installing, configuring, or upgrading the switch, see the release notes on Cisco.com for the latest information. These documents provide complete information about the switch and are available from these Cisco.com sites:...
  • Page 9 Guidelines For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html...
  • Page 10 Preface Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 11 C H A P T E R Product Overview The Catalyst 3750-E and Catalyst 3560-E family of switches, also referred to as the switch, are Ethernet switches to which you can connect devices such as Cisco IP Phones, Cisco Wireless Access Points, workstations, and other network devices such as servers, routers, and other switches.
  • Page 12 Catalyst 3750E-48 PoE WS-C3750E-48PD Full 48 10/100/1000 ports with 740 W of PoE, 2 Power 10-Gigabit Ethernet X2 module slots 1. All Catalyst 3750-E switches support Cisco StackWise technology. 2. PoE = Power over Ethernet Table 1-2 Catalyst 3560-E Switch Models...
  • Page 13 (port 2). On a 24-port switch, module slot numbers are 25, 26 upper, 27, 28 lower. On a 48-port switch, module slot numbers are 49, 50 upper, 51, 52, lower. 2. For use with the Cisco TwinGig Converter Modules and Cisco X2 transceiver modules. Figure 1-2...
  • Page 14 10-Gigabit Ethernet module slots 1. Slot numbering is from left to right, with slot 1 on the far left. 2. For use with the Cisco TwinGig Converter Modules and Cisco X2 transceiver modules. 10/100/1000 Ethernet Ports The 10/100/1000 Ethernet ports use standard RJ-45 connectors with Ethernet pinouts. The maximum cable length is 328 feet (100 meters).
  • Page 15 The switch 10-Gigabit Ethernet module slots are used for uplink connection to other switches and routers. The module slots operate in full duplex mode and use the hot-swappable Cisco X2 transceiver modules and the Cisco TwinGig Converter Module. For the supported X2 transceiver modules, see the switch release notes on Cisco.com at this location:...
  • Page 16 RPS 2300 Speed LED System LED Duplex LED 1. Only switches with PoE ports. 2. Only Catalyst 3750-E switches. 3. RPS = redundant power system (only 24- and 48-port switches). Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 17 System is operating normally. Amber System is receiving power but is not functioning properly. For information on the System LED colors during power-on self-test (POST), see the “Diagnosing Problems” section on page 4-1. Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 18 The power supply in a switch has failed, and the RPS is providing power to that switch (redundancy has been allocated to this device). For more information about the RPS 2300, see the Cisco RPS 2300 Redundant Power System Hardware Installation Guide on Cisco.com at this location: http://www.cisco.com/en/US/docs/switches/power_supplies/rps2300/hardware/installation/guide/2300...
  • Page 19 LED colors in different port modes. On a Catalyst 3750-E switch stack, when you press the Mode button on any switch in the stack, all the switches in the stack change to display the same selected mode. For example, if you press the mode button on the stack master to display SPEED, all the other switches in the stack also display SPEED.
  • Page 20 Blinking green Port is operating at up to 10 Gbps. STACK No stack member corresponding to that member number. (stack member) Blinking green Stack member number. Green Member numbers of other stack member switches. Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide 1-10 OL-9774-04...
  • Page 21 Blinking amber PoE mode is not selected. At least one of the 10/100/1000 ports has been denied power, or at least one of the 10/100/1000 ports has a PoE fault. Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide 1-11 OL-9774-04...
  • Page 22 Stack LED On Catalyst 3750-E switches, the stack LED shows the sequence of member switches in a stack. Up to nine switches can be members of a stack. The first nine port LEDs show the member number of a switch in a stack.
  • Page 23 Ground location Fan module RPS 2300 connector (shown with cover) Fan exhaust Console port Ethernet management port and LED Power-supply LEDs StackWise ports Power-supply module 1. Only Catalyst 3750-E switches. Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide 1-13 OL-9774-04...
  • Page 24 Ethernet management port and LED Power-supply-module LEDs StackWise Ports The Catalyst 3750-E switch ships with a 0.5-meter StackWise cable (72-2632-XX CABASY) that you can use to connect the StackWise ports. Use only approved cables (CAB-STACK-50CM, CAB-STACK-1M, or CAB-STACK-3M), and connect Caution only to similar Cisco equipment.
  • Page 25 Chapter 1 Product Overview Rear Panel Description You can order these StackWise cables from your Cisco sales representative: CAB-STACK-50CM= (0.5-meter cable) • CAB-STACK-1M= (1-meter cable) • CAB-STACK-3M= (3-meter cable) • Power-Supply Modules The 24- and 48-port switches are powered through an internal power-supply module. The “24- and...
  • Page 26 DC-power supplies do not have an on/off switch. Table 1-13 Catalyst 3560E-12D and 3560E-12SD Switch Power-Supply Modules Switch AC-Power-Supply Module DC-Power-Supply Module Catalyst 3560E-12D C3K-PWR-300WAC= C3K-PWR-300WDC= Catalyst 3560E-12SD C3K-PWR-300WAC= C3K-PWR-300WDC= Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide 1-16 OL-9774-04...
  • Page 27 (part number C3K-BLWR-60CFM=). The air circulation system consists of the fan module and the power supply modules. The airflow patterns vary depending on the power supply configuration. Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide 1-17 OL-9774-04...
  • Page 28 STAT X2- 2 DUPL EX X2- 3 SPEE D MOD E X2- 4 X2- 5 X2- 6 X2- 7 X2- 8 X2- 9 X2- 10 X2- 11 X2- 12 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide 1-18 OL-9774-04...
  • Page 29 It automatically senses when the power supply of a connected switch fails and provides power to the failed switch, preventing loss of network traffic. The Cisco RPS 2300 has two output levels: –52 V and 12 V. The total maximum output power depends on the installed power-supply modules.
  • Page 30 Chapter 1 Product Overview Management Options For more information about the RPS 2300, including device support other than for the Catalyst 3750-E and 3560-E switches, see the Cisco Redundant Power System 2300 Hardware Installation Guide on Cisco.com at this location: http://www.cisco.com/en/US/docs/switches/power_supplies/rps2300/hardware/installation/guide/2300...
  • Page 31 Cisco IOS CLI • The switch CLI is based on Cisco IOS software and is enhanced to support desktop-switching features. You can fully configure and monitor the switch and switch cluster members from the CLI. You can access the CLI either by connecting your management station directly to the switch management port or a console port or by using Telnet from a remote management station.
  • Page 32 Chapter 1 Product Overview Management Options Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide 1-22 OL-9774-04...
  • Page 33 C H A P T E R Switch Installation This chapter describes how to install a Catalyst 3750-E or a Catalyst 3560-E switch and make connections to the switch. It also includes planning and cabling considerations for stacking switches (only Catalyst 3750-E switches). Read the topics and perform the procedures in this order: Preparing for Installation, page 2-1 •...
  • Page 34 VoIP and the emergency calling service. In the USA, this emergency number is 911. You need to be aware of the emergency number in your country. Statement 361 Attach only the following Cisco RPS model to the RPS receptacle: RPS 2300. Statement 370 Warning Warning Read the wall-mounting instructions carefully before beginning installation.
  • Page 35 This unit might have more than one power supply connection. All connections must be removed to Warning de-energize the unit. Statement 1028 Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Warning Statement 1030 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 36 The grounding architecture of this product is DC-isolated (DC-I) Note Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 37 Temperature around the unit does not exceed 113°F (45°C). If the switch is installed in a closed or multirack assembly, the temperature around it might be greater than normal room temperature. Cisco Ethernet Switches are equipped with cooling mechanisms, such as fans and blowers. However, •...
  • Page 38 If you do not specify the length of the StackWise cable, the 0.5-meter cable is supplied. If you need the 1-meter cable or the 3-meter cable, you can order it from your Cisco supplier. For cable part numbers, see the “StackWise Ports”...
  • Page 39 3-meter StackWise cable in addition to the supplied 0.5-meter StackWise cable. This configuration also provides redundant connections. Figure 2-2 Stacking the Catalyst 3750-E Switches in a Vertical Rack or on a Table Using 0.5-meter and 3-meter StackWise Cables Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide...
  • Page 40 Stack Bandwidth and Partitioning Examples This section provides examples of stack bandwidth and possible stack partitioning. Figure 2-5 shows an example of a stack of Catalyst 3750-E switches that provides full bandwidth and redundant StackWise cable connections. Figure 2-5 Example of a Stack with Full Bandwidth Connections...
  • Page 41 Stack Cabling Configurations Figure 2-7 Figure 2-8 show examples of stacks of Catalyst 3750-E switches with failover conditions. Figure 2-7, the StackWise cable is bad in link B; therefore, this stack provides only half bandwidth and does not have redundant connections. In Figure 2-8, link B is bad;...
  • Page 42 After Installing the Switch, page 2-17 • The illustrations shown in this section show the Catalyst 3750E-48 PoE switch as an example. Except for wall-mounting, you can install the Catalyst 3750-E and Catalyst 3560-E switches following the same procedures. Rack-Mounting To install the switch in a 19-inch rack, follow the instructions described in this section.
  • Page 43 19-inch brackets, part number RCKMNT-E-1RU= 23-inch brackets, part number RCKMNT-E-MISC= 23/24-inch brackets, part number RCKMNT-E-MISC= ETSI brackets, part number RCKMNT-E-MISC= Wall-mount brackets for Catalyst 3560E-12D switches, part number 700-25427-XX= Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide 2-11 OL-9774-04...
  • Page 44 Removing Screws from the Switch 47 X X2 -1 X2 -2 C at al ys t 3 7 5 0 -E 48 X SE RI ES P o E -4 8 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide 2-12 OL-9774-04...
  • Page 45 P o E -4 8 10 0- 24 0- 10 -5 A AC O K 50 -6 0 HZ PS O K Front-mounting position Mid-mounting position Number-8 Phillips flat-head screws Rear-mounting position Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide 2-13 OL-9774-04...
  • Page 46 PoE -48 100- 240 10-5 A AC OK 50-6 0 HZ PS OK Phillips machine screw, black Number-12 Phillips machine screws Cable guide Mid-mounting position Front-mounting position Rear-mounting position Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide 2-14 OL-9774-04...
  • Page 47 Do not use the 19-inch brackets to wall-mount the switch. The brackets are not suitable for wall-mounting. Figure 2-13 Attaching the Brackets for Wall-Mounting (only Catalyst 3560E-12D Switches) X2 -9 X2 -10 X2 -11 X2 -12 Phillips truss-head screws Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide 2-15 OL-9774-04...
  • Page 48 Wall-Mounting Catalyst 3560E-12D Switches, Left-Side Panel Facing Up User-supplied screws When you complete the switch installation, see the “After Installing the Switch” section on page 2-17 for more information switch configuration. Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide 2-16 OL-9774-04...
  • Page 49 Configure the switch by running Express Setup to enter the initial switch configuration. For • instructions, see the switch getting started guide that shipped with the switch and also on Cisco.com. Use the CLI setup program to enter the initial switch configuration. See Appendix C, “Configuring...
  • Page 50 “Planning a Switch Stack (Catalyst 3750-E Switches)” section on page 2-6. Always use a Cisco-approved StackWise cable to connect the switches. Follow these steps to connect the StackWise cable to the StackWise ports: Remove the dust covers from the StackWise cables and StackWise ports, and store them for future use.
  • Page 51 Cisco module has an internal serial EEPROM that is encoded with security information. This encoding provides a way for Cisco to identify and validate that the module meets the requirements for the switch. For more information about installing, removing, cabling, and troubleshooting X2 transceiver modules, see the module documentation that shipped with your device.
  • Page 52 1 Module inserted face up 2 Module inserted face down Figure 2-18 Installing X2 Transceiver Modules in Catalyst 3560E-12D Switches X 2 -1 1 X 2 -1 2 1 Module inserted facing right Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide 2-20 OL-9774-04...
  • Page 53 1 Module inserted face up 2 Module inserted face down Figure 2-20 Installing Converter Modules in Catalyst 3560E-12D Switches X 2 -1 1 X 2 -1 2 1 Module inserted facing right Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide 2-21 OL-9774-04...
  • Page 54 Cisco.com for the list of SFP modules that the switch supports. Use only Cisco SFP modules on the switch. Each Cisco module has an internal serial EEPROM that is encoded with security information. This encoding provides a way for Cisco to identify and validate that the module meets the requirements for the switch.
  • Page 55 If the module has a bale-clasp latch, close it to lock the SFP module in place. Step 7 Remove the SFP dust plugs and save. Connect the SFP cables. Step 8 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide 2-23 OL-9774-04...
  • Page 56 Converter Module with SFP Modules Installed in Catalyst 3560E-12D Switches X 2 -1 0 X 2 -1 1 X 2 -1 2 Converter module Send (TX) optical bore SFP modules Receive (RX) optical bore Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide 2-24 OL-9774-04...
  • Page 57 Category 5e and Category 6 cables can store high levels of static electricity. Always ground the cables Caution to a suitable and safe earth ground before connecting them to the switch or other devices. Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide 2-25 OL-9774-04...
  • Page 58 “10/100/1000 Ethernet Port Connections” section on page 2-26. The PoE ports provide PoE support for devices compliant with IEEE 802.3af and also provide Cisco pre-standard PoE support for Cisco IP Phones and Cisco Aironet Access Points. Each port can deliver up to 15.4 W of PoE. With the 1150-W power-supply module, the Catalyst 3750E-48PS and Catalyst 3560E-48PS switches can deliver 15.4 W on all 48 ports.
  • Page 59 The results show output current, output power, and system heat dissipation. You must be a registered Cisco.com user to access the Cisco Power Calculator. If you do not have a user ID or password, you can register at this URL: http://tools.cisco.com/RPF/register/register.do...
  • Page 60 Use the CLI to configure the switch as a member of a cluster or as an individual switch from the • console. See the switch command reference on Cisco.com for information on using the CLI with the switch. Start an SNMP application such as the CiscoView application.
  • Page 61 C H A P T E R Power Supply and Fan Module Installation This chapter describes how to remove and install a new or replacement power supply or fan module in a Catalyst 3750-E or Catalyst 3560-E switch. See these sections: Installation Overview, page 3-1 •...
  • Page 62 Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Warning Statement 1030 Do not work on the system or connect or disconnect cables during periods of lightning activity. Warning Statement 1001 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 63 Step 7 For 24- and 48 port switches, align the two captive screws with the screw holes. Using a ratcheting torque screwdriver, torque each screw to 7 lbf-in. (112 ozf-in.). Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 64 DC circuit, switch the circuit breaker to the OFF position, and tape the switch handle of the circuit breaker in the OFF position. Use a voltmeter to test for 0 (zero) voltage at the power terminals on the chassis. Statement 196 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 65 Statement 1024 When installing or replacing the unit, the ground connection must always be made first and Warning disconnected last. Statement 1046 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 66 Using a ratcheting torque screwdriver, torque the ground-lug screws to 60 lbf-in. (960 ozf-in.) Step 6 (Figure 3-6 Figure 3-7). Connect the other end of the grounding wire to an appropriate grounding point at your site or to the rack. Step 7 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 67 Inp ut Inp ut Ou tpu t Ou tpu t Single-ground screw and lug ring Dual-ground screw and lug ring 1. See Figure 1-9 for the Catalyst 3560E-12SD ground location. Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 68 For Catalyst 3560E-12D and 3560E-12SD switches, align the captive screw with the screw hole. Using a ratcheting torque screwdriver, torque the screw to 4 lbf-in. (64 ozf-in.) Step 8 Connect the input power as described in the “Wiring the DC-Input Power Source” section. Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 69 Connect to grounded metal rack, or connect to earth ground if the switch is not installed in a grounded rack. Step 4 Torque all terminal block screws to 5 lbf-in. (80 ozf-in.). Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 70 Statement 206 Figure 3-12 Inserting the Fan Module in 24- and 48-Port Switches AC OK PS OK 100 -240 1.0- 5A 50-6 0 HZ Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide 3-10 OL-9774-04...
  • Page 71 Figure 3-13 Inserting the Fan Module in Catalyst 3560E-12D and 3560E-12SD Switches (Catalyst 3560E-12D Switch Shown) Inp ut Ou tpu t CO NS OL Inp ut Ou tpu t Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide 3-11 OL-9774-04...
  • Page 72 Chapter 3 Power Supply and Fan Module Installation Installing a Fan Module Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide 3-12 OL-9774-04...
  • Page 73 If the switch fails POST, the System and Ethernet management port LEDs are amber. Note POST failures are usually fatal. Contact your Cisco technical support representative if your switch does not pass POST. Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide...
  • Page 74 Try the cable in another port or interface, if possible, to see if the problem follows the cable. • Catalyst 3750-E switch StackWise cable: remove and inspect the cable and StackWise port for bent • pins or damaged connectors. If the StackWise cable is bad, replace it with a known good cable.
  • Page 75 PoE fault from the network.) Transceiver Issues Use only Cisco X2 transceiver modules and SFP modules on the switch. Each Cisco module has an internal serial EEPROM that is encoded with security information. This encoding provides a way for Cisco to identify and validate that the module meets the requirements for the switch.
  • Page 76 • Let both ports autonegotiate both speed and duplex. • Manually set the speed and duplex parameters for the ports on both ends of the connection. Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 77 Setup as described in the switch getting started guide that is included with the switch. You can also configure the switch by using the CLI setup procedure described in the Configuring the Switch with the CLI-Based Setup Program appendix. Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 78 Finding the Switch Serial Number Finding the Switch Serial Number If you contact Cisco Technical Assistance, you need to know the serial number of your switch. See Figure 4-1 to find the serial number on your switch. You can also use the show version privileged EXEC command to get the switch serial number.
  • Page 79 Power on the replacement switch. The replacement switch will have the same configuration for all the interfaces as the failed switch and will function the same as the failed switch. Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 80 Chapter 4 Troubleshooting How to Replace a Failed Stack Member Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 81 A P P E N D I X Technical Specifications This appendix lists the Catalyst 3750-E and Catalyst 3560-E switch technical specifications. Table A-1 shows the switch environmental and physical specifications. Table A-1 Switch Environmental and Physical Specifications Environmental Ranges Operating temperature 32 to 113°...
  • Page 82 1. The Total input and Total output BTU ratings refer to input power into the power supply and output power from the power supply that is input into the switch. Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 83 1. The Total input and Total output BTU ratings refer to input power into the power supply and output power from the power supply that is input into the switch. Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 84 Appendix A Technical Specifications Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 85 A P P E N D I X Connector and Cable Specifications This appendix describes the cables and adapters that you use to connect the Catalyst 3750-E and Catalyst 3560-E switches to other devices. This appendix includes these sections: “Connector Specifications” section on page B-1 •...
  • Page 86 The 10-Gigabit Ethernet optical modules use SC connectors or Infiniband 4x connectors, as shown in Figure B-2 Figure B-3. Figure B-2 10-Gigabit Ethernet Optical Module SC Connector Figure B-3 10-Gigabit Ethernet Infiniband 4x Connector Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 87 Duplex LC Cable Connector Figure B-5 Simplex LC Cable Connector Figure B-6 Copper SFP Module RJ-45 Connector Label 4 5 6 7 8 TP0+ TP0- TP1+ TP2+ TP2- TP1- TP3+ TP3- Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 88 You need to provide a RJ-45-to-DB-25 female DTE adapter if you want to connect the switch console port to a terminal. You can order a kit (part number ACS-DSBUASYN=) containing that adapter from Cisco. For console port and adapter pinout information, see Table B-4 Table B-5. Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 89 Appendix B Connector and Cable Specifications Cable and Adapter Specifications Cable and Adapter Specifications These sections describe the cables and adapters used with Catalyst 3750-E and Catalyst 3560-E switches: 10-Gigabit Ethernet X2 Transceiver Module Cable Specifications, page B-5 • SFP Module Cable Specifications, page B-6 •...
  • Page 90 62.5 722 feet (220 m) 62.5 902 feet (275 m) 1640 feet (500 m) 1804 feet (550 m) 1000BASE-ZX 1550 G.652 — 43.4 to 62 miles (70 to 100 km) Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 91 1 TP1+ 2 TPO- 2 TP1- 3 TP1+ 3 TPO+ 6 TP1- 6 TPO- 4 TP2+ 4 TP3+ 5 TP2- 5 TP3- 7 TP3+ 7 TP2+ 8 TP3- 8 TP2- Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 92 1 TD+ 2 RD– 2 TD– Figure B-12 Two Twisted-Pair Crossover Cable Schematic Switch Switch 3 TD+ 3 TD+ 6 TD– 6 TD– 1 RD+ 1 RD+ 2 RD– 2 RD– Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 93 RJ-45-to-DB-9 adapter cable, and the console device. Table B-4 Console Port Signaling Using a DB-9 Adapter Switch Console RJ-45-to-DB-9 Console Port (DTE) Terminal Adapter Device Signal DB-9 Pin Signal Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 94 Note ACS-DSBUASYN=) containing this adapter from Cisco. Table B-5 Console Port Signaling Using a DB-25 Adapter Switch Console RJ-45-to-DB-25 Console Port (DTE) Terminal Adapter Device Signal DB-25 Pin Signal Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide B-10 OL-9774-04...
  • Page 95 Configuring the Switch with the CLI-Based Setup Program This appendix provides a CLI-based setup procedure for a Catalyst 3750-E and Catalyst 3560-E standalone switch or a switch stack. Before connecting the switch to a power source, review the safety warnings in Chapter 2, “Switch Installation.”...
  • Page 96 Configuring the Switch with the CLI-Based Setup Program Entering the Initial Configuration Information For Catalyst 3750-E switches, if you have stacked your switches, connect to the 10/100 Ethernet Note management port or console port of one of the switches in the stack. The initial configuration for the entire stack can be performed on any switch in the stack.
  • Page 97 (Optional) Configure Simple Network Management Protocol (SNMP) by responding to the prompts. You can also configure SNMP later through the CLI, the device manager, or the Network Assistant application. To configure SNMP later, enter no. Configure SNMP Network Management? [no]: no Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 98 0 15 password terminal-password no snmp-server no ip routing interface Vlan1 no shutdown ip address 10.4.120.106 255.0.0.0 interface GigabitEthernet1/0/1 interface GigabitEthernet1/0/2 interface GigabitEthernet1/0/3 ...<output abbreviated> interface GigabitEthernet1/0/23 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 99 After you complete the setup program, the switch can run the default configuration that you created. If you want to change this configuration or want to perform other management tasks, use Cisco Network Assistant, the Cluster Management Suite (CMS), or another management tool for further configuration.
  • Page 100 Appendix C Configuring the Switch with the CLI-Based Setup Program Entering the Initial Configuration Information Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-04...
  • Page 101 Cisco Network Assistant 1-20 airflow patterns 1-18, 1-19 Cisco Power Calculator 2-27 altitude, operating and storage Cisco TwinGig Converter Module autonegotiation described default setting installation 2-26 2-19 troubleshooting CiscoView 1-21 Catalyst 3750-E and 3560-E Switch Hardware Installation Guide IN-1 OL-9774-04...
  • Page 102 LEDs 1-6 to 1-12 to configure switch 2-28 PoE ports diagnosing problems dimensions duplex default setting 2-26 ground connection troubleshooting ground connection warning 2-3, 3-5 HP OpenView 1-21 humidity, relative Catalyst 3750-E and 3560-E Switch Hardware Installation Guide IN-2 OL-9774-04...
  • Page 103 B-9 to B-10 console port B-10 speed crossover cable stack 1-12 crossover cables STATUS four twisted-pair system two twisted-pair troubleshooting with 4-1 to 4-2 RJ-45-to-DB-25 terminal adapter B-10 RJ-45-to-DB-9 terminal adapter Catalyst 3750-E and 3560-E Switch Hardware Installation Guide IN-3 OL-9774-04...
  • Page 104 2-22 to 2-25 procedures patch cable connection supported 2-19 to 2-27, 3-3 to 3-10 installation 2-10 to 2-17 SFP module slot numbering product disposal warning shelf-mounting 2-17 shielding Ethernet cables warning Catalyst 3750-E and 3560-E Switch Hardware Installation Guide IN-4 OL-9774-04...
  • Page 105 DC circuit link status restricted access area ping end device RPS connector cover PoE connections servicing equipment port and interface settings shielding Ethernet cables stacking equipment wall-mounting 2-2, 2-15 weight Catalyst 3750-E and 3560-E Switch Hardware Installation Guide IN-5 OL-9774-04...
  • Page 106 Index X2 transceiver modules described installation 2-19 removing 2-22 See also 10-Gigabit Ethernet module slot Catalyst 3750-E and 3560-E Switch Hardware Installation Guide IN-6 OL-9774-04...

This manual is also suitable for:

Catalyst 3560-e