Advertisement
Quick Links
REQUIRED
•
2 people
•
A pair of scissors
•
Hex key 10 mm
•
Electric screwdriver PZ2 bit
•
Nut wrench 13 mm
OPTIONAL TOOLS
•
Sandpaper P120 for wood finishing
CONTACT
Questions, comments or suggestions
regarding our products or our website?
Feel free to get in touch with us!
Wünder — Ovenhoek 5, 8800 Roeselare, Belgium
+32 51 79 17 31 — info@wunder.be
ASSEMBLY
INSTRUCTIONS
THE CIRCLE
IN THE PACKAGE
•
Assembly instructions – 1 piece
•
Seat
- 2 pieces
•
Table top – 1 piece
•
Table leg – 2 pieces
•
Box with connectors and accessories
Advertisement
Summary of Contents for WUNDER THE CIRCLE
- Page 1 OPTIONAL TOOLS • Sandpaper P120 for wood finishing CONTACT Questions, comments or suggestions regarding our products or our website? Feel free to get in touch with us! Wünder — Ovenhoek 5, 8800 Roeselare, Belgium +32 51 79 17 31 — info@wunder.be...
- Page 2 • Place the table legs opposite each other, preferably on a flat surface. • If necessary, turn the levelling feet in or out to level the parts. • Screw on the mounting brackets, using the countersunk M8 bolts and a 10 mm hex key. •...
- Page 3 • Place the table top on top of the underframe. • Make sure the leaf is firmly on the underframe. If necessary, use a tension clamp or place a weight on the table top. • Place the washers and M10 lock nuts on the threaded rods. Use a 17mm socket spanner to tighten the nuts securely.
- Page 4 First turn all the levelling feet fully inwards. • Check if there are any levelling feet that do not touch the floor by turning them until they just touch the floor. • Whenever The Circle is moved, it is advisable to check the levelling feet again.
Need help?
Do you have a question about the THE CIRCLE and is the answer not in the manual?
Questions and answers