Page 1
Tyler - External Attach Frame For Airbus H125 & AS-350 Series Helicopters FAA STC # SR01652 LA • Transport Canada File No.C-10-0273 PLEASE RETURN THIS MANUAL WITH EQUIPMENT Tyler Camera Systems 14218 Aetna Street Van Nuys, California 91401 • USA www.tylertech.net • 800-390-6070 •...
Page 3
JOB #: DATE: 3-11-03 EXTERNAL ATTACH FRAME INSTALLATION MANUAL FOR EUROCOPTER FRANCE 350 & 355 SERIES HELICOPTERS PREPARED BY: G. Wood # OF PAGES: CHECKED BY: N. Tyler # OF DRAWINGS: 3-21-03 APPROVED BY: REVISIONS PAGES REVISION DATE APPROVAL AFFECTED LETTER...
Page 5
SECTION 1 Fast Rope Assembly to TSOP Installation RIGHT SIDE SHOWN...
Page 6
PIP-Pin View of transmission compartment with TOP “Y” BRACE installed RIGHT SIDE SHOWN...
Page 7
Remove two bolts from transmission cowl latch retainer. Install top “Y” bracket & reinstall the two bolts loosely. RIGHT SIDE SHOWN...
Page 8
Remove nut from bulkhead bracket, back out bolt & install top “Y” bracket RIGHT SIDE SHOWN...
Page 9
Install clevis on transmission mount with supplied bolt. Now you may tighten all three points RIGHT SIDE SHOWN...
Page 10
Mark as shown & notch engine cowl for top “Y” brace...
Page 11
L-PIN FAST ROPE ARM Bottom of arm attaches to TSOP front skid gear clamp with L-pin UPPER BRACE Install upper brace from top “Y” bracket to top tab on arm with pip pins.
Page 12
UPPER BRACE REAR BRACE Install two rear braces as shown with pip pins RIGHT SIDE SHOWN...
Page 13
Large pip pin holds hook assembly onto arm Pip pin location to Lock Hook Release...
SECTION 2 (Alternate Method) Fast Rope Assembly to Skid Gear Installation RIGHT SIDE SHOWN Note: A-Frame Brace installation the same as pages 4-8...
Page 18
FAST ROPE ARM Attach Skid-Gear Clamp as shown, adjusting clamps as needed to get a snug-tighht fit, and secure with Pip-pins. Then attach the bottom of the Main Fast-Rope support tube to the Skid-Gear Clamp assembly using the L-pin, and secure with the Safety-clip.
Page 19
FAST ROPE TO SKID GEAR INSTALLED WITH HOOK & RELEASE Refer to pages 13-16 for hook and release installation...
Page 27
The information in this supplement is FAA approved material and must be attached to the FAA Approved AS 350 355 Rotorcraft Flight Manual when the airplane has been modified by the installation of Tyler External Attach Frame in accordance with:...
Page 37
124.8 IN. (3.17M) @ 4000 LBS. (2000 KG) 126.5 IN. (3.185M) @ 5000 LBS. (2100 KG) REARWARD LIMIT: 137.9 IN. (3.445M) @ 5000LBS. (2100KG) 139.3 IN. (3.49M) @ 4000 LBS. (1750 KG) EXTERNAL ATTACH FRAME 350 Page 1 Tyler Camera Systems Confidential...
Page 38
124.8 IN. (3.17M) @ 4000 LBS. (2000 KG) 126.5 IN. (3.185M) @ 5000 LBS. (2100 KG) REARWARD LIMIT: 137.9 IN. (3.445M) @ 5000LBS. (2100KG) 139.3 IN. (3.49M) @ 4000 LBS. (1750 KG) EXTERNAL ATTACH FRAME 355 Page 1 Tyler Camera Systems Confidential...
Page 39
124.8 IN. (3.17M) @ 4000 LBS. (2000 KG) 126.5 IN. (3.185M) @ 5000 LBS. (2100 KG) REARWARD LIMIT: 137.9 IN. (3.445M) @ 5000LBS. (2100KG) 139.3 IN. (3.49M) @ 4000 LBS. (1750 KG) STAND ALONE EXTERNAL FRAME 350 Page 1 Tyler Camera Systems Confidential...
Page 40
124.8 IN. (3.17M) @ 4000 LBS. (2000 KG) 126.5 IN. (3.185M) @ 5000 LBS. (2100 KG) REARWARD LIMIT: 137.9 IN. (3.445M) @ 5000LBS. (2100KG) 139.3 IN. (3.49M) @ 4000 LBS. (1750 KG) STAND ALONE EXTERNAL FRAME 355 Page 1 Tyler Camera Systems Confidential...
Need help?
Do you have a question about the ASTAR and is the answer not in the manual?
Questions and answers