Advertisement
Quick Links
THINKCAR VENU 5
Tire Pressure Sensor
CAUTION: Before operating or servicing the sensor, read these instructions carefully, paying particular attention to the
safety warnings and precautions. Proper and careful use of the sensor may result in damage and/or personal injury and will
void the warranty.
safety net
Please read the precautions and installation instructions carefully before installing the sensor. For reasons of safety and
optimal operation, we recommend that all servicing and maintenance work be carried out only by trained professionals.The
TPMS (Tire Pressure Monitoring System) sensor is a safety component of the vehicle and is intended for professional
installation only.Improper installation may result in damage to the TPMS sensor. Star Card assumes no responsibility for
damage to equipment, financial loss or injury or death caused by improper operation.
caveat
When removing or mounting vehicle tires, follow the tire changer manufacturer's instructions exactly.
Do not use a vehicle equipped with this sensor for racing. Keep the speed of vehicles equipped with this sensor below
240km/h at all times.。
To ensure optimum performance, do not install accessories from other manufacturers and brands of tire pressure sensors
on StarCard Tire Pressure Sensors.
Prior to installation make sure to use the StarCard Tire Pressure Specific Test Equipment to program the StarCard
sensors by selecting a specific trim level, model year and year.
Do not install a programmed StarCard sensor in a damaged wheel.
Quick Start Guide
Advertisement
Related Manuals for Thinkcar VENU 5
Summary of Contents for Thinkcar VENU 5
- Page 1 THINKCAR VENU 5 Tire Pressure Sensor Quick Start Guide CAUTION: Before operating or servicing the sensor, read these instructions carefully, paying particular attention to the safety warnings and precautions. Proper and careful use of the sensor may result in damage and/or personal injury and will void the warranty.
- Page 2 After completing the installation, test the vehicle's TPMS system by following the steps described in the original manufacturer's user guide to confirm proper installation. Sensor Components Valve Cap Valve Nut Valve Stem Set Screw Sensor Body Technical Parameters Weight: ±30g Operating Frequency: 433MHz/315MHz Dimension (L*W*H ): ±71.78*42*27.34mm Waterproof rating: IP67...
- Page 3 Clamp the tire onto the tire changer, adjust the valve to the 1 o'clock position relative to the tire separation head, insert the tire tool and lift the tire bead onto the mounting head to remove the bead. Note: This starting position must be observed during the entire disassembly process. 3.
- Page 4 5. Mounting the tire Mount the tire on the rim by placing the tire on the rim, making sure that the valve faces the breakaway head at an angle of 180°. NOTE:Please follow the tire changer manufacturer's instructions strictly for mounting the tire to the rim. Warranty StarCard warrants the sensor free of charge against any material or manufacturing defect for a period of 24 months or 50,000 kilometers, whichever comes first.
Need help?
Do you have a question about the VENU 5 and is the answer not in the manual?
Questions and answers