Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for djpower H-IP9S
-
Page 3: Before You Begin
The information and specifications contained in this User Manual are subject to change without notice. DJPOWER assumes no responsibility or liability for any errors or omissions and reserves the right to revise or to create this manual at any time.Copyright © 2024 DJPOWER. All rights reserved. - Page 4 2 INTRODUCTION Introduction H-IP9S is a new waterproof high-end DMX FAN launched by DJPOWER. Using stainless steel and the design of waterproof construction. IP55 waterproof rate, DMX and wireless control. Adjustable wind speed, wind outlet angle 270 ° adjustable. It can be Inclined used and upside down used. Use with fog...
-
Page 5: Product Overview
machine, it can thin the fog, spreading further. Used with snow or bubble machine, snow or bubble can spread further and higher. Features • Using stainless steel and the design of waterproof construction. IP55 waterproof rate • DMX and wireless control •... -
Page 6: Product Dimensions
Product Dimensions 3 TECHNICAL SPECIFICATIONS Input Voltage & Rate AC 100-120 V, 50/60 Hz AC 220-240 V, 50/60 Hz AC Power Current Limiter 5 A/250 V 3 A/250 V Total Power Consumption 210 W 210 W Waterproof IP Rate IP 55 Wind angle 0-270°... - Page 7 For safety reasons, make sure the unit is well mounted through bracket and with safety cable. Also make sure there is adequate room for ventilation, configuration, and maintenance.Please use the quick-lock hook to fix the H-IP9S, when hanging upside down. You can use the rubber feet to place it on a flat surface,when lay it in flat.
-
Page 8: Operation
• Make sure that the structure or surface onto which you are mounting the product can support the product’s weight (see the Technical Specifications). • When mounting the product on the floor, make sure that the product and cables are away from people and vehicles. -
Page 9: Dmx Mode & Operation
Press language, and press ENTER to save English English DMX Mode & Operation The Machine H-IP9S works with a DMX controller. 5.3.1 DMX Mode Menu Map While connect to DMX signal, the display will show DMX starting address, and you can press “▲”... - Page 10 Wireless control Mode & Operation wireless remote control function 5.4.1 When open the function of machine wireless remote control, can been controlled by W-7. It’s 4 buttons, A/ B/ C/ D. A is 1%, B is 33%, C is 66%, D is 100%. When press A, the fan start to work. Press A again, the fan stop to work.
Need help?
Do you have a question about the H-IP9S and is the answer not in the manual?
Questions and answers