Summary of Contents for Hy-Ram Tin12/ECE3
- Page 1 User Manual, Operating Instructions and Specifications 9.6KW Generator Tin12/ECE3 Specification ANCILLARY EQUIPMENT • • • • INNOVATION DESIGN MANUFACTURE SUPPLY...
- Page 2 Specifications below are for full frame, standard fuel tank & recoil start. Engine Output Weight (kg) Fuel (litres) Hours Run @ ¾ load Noise d(B)A @ 7m VG18HP 9.0kW 72> Safety: Read these instructions thoroughly before attempting to operate the machine. If you have any doubts about the safe operation of this equipment, consult the manufacturer or a competent operator.
- Page 3 Starting: • The throttle control lever is pre-set to the correct engine speed and must not be adjusted, otherwise damage to equipment or the generator may be caused and will invalidate any warranty • Check that the generator is located on level ground and in an open space with free air flow on all sides, at least one metre from other equipment and buildings, and clear of any combustible material •...
- Page 4 Tel: + 44 1623 422 982 Fax: + 44 1623 661 022 Page 4 of 4...
- Page 5 For Sales, Hire and Repair support contact our admin team or scan the QR code for further details www.hyram.com +44 (0) 1623 422982 enquiries@hyram.com Head Office Mansfield Hire Depot Bury – North West Enfield – South East Pelham Street Unit 5 Unit 18 Unit 2 Mansfield...
Need help?
Do you have a question about the Tin12/ECE3 and is the answer not in the manual?
Questions and answers