Swiss+go MT-100 Manual

Description

DISPLAY UNIT AND EXTERNAL SENSOR

1. Outdoor temperature and humidity
2. Sensor low battery indicator
3. Outdoor sensor signal strength
4. Outdoor temperature alert icon
5. RCC signal
6. Alarm clock icon
7. Time
8. Weather forecast
9. Barometer and pressure trend display
10. Indoor temperature and humidity
11. Indoor temperature alert icon

12.13.14 Schedule

15. Wall mount slot
16. foot
17. Compartment for 3xAAA batteries (batteries not included)
18. USB charging port
19. External power socket
20. Wireless signal indicator (Blinks when data is being sent to the display unit)
21. Hole for wall mounting of outdoor sensor
22. Outdoor sensor channel selector
23. Compartment 2x AAA batteries (batteries not included) of the sensor

Buttons:

1. SNZ/LIGHT button
2. MODE button
3. SET button
4. ALARM button
5. RF button
6. DOWN button
7. UP button

Installing or replacing batteries

We recommend using high quality batteries to get the best performance from the product. The use of standard or rechargeable batteries is not recommended. The outdoor sensor requires lithium batteries in low temperature conditions, as low temperatures may cause alkaline batteries to malfunction.

Do not mix old and new batteries. Do not mix alkaline, standard and/or rechargeable batteries.

Default settings

1. Default time: 0:00 (Time form: 24H)
2. Default date: 1/1 (Year: 2020, date form: D/M)
3. Default week: MIT (Language: GER, 7 languages can be selected)
4. Weather forecast: Partly sunny
5. Default temperature: °C
6. Barometer unit: hpa
7. Default alarm: 00:00, default snooze time: 5min.

LCD active for 3 seconds when changing new battery or reset.