Cisco Flip video Manual

Usage Instructions

Action Mount Position Using Adjustable Straps

1. Fold legs up and snap adjustable straps onto action tripod base.
2. Position action tripod base on your gear as desired.
3. Tightly wrap adjustable straps around action tripod base and your gear until action tripod is secure.
4. Screw camcorder onto action tripod neck securely and adjust camcorder to desired angle.
5. For safety purposes, turn camcorder on and begin recording prior to starting your activity.

Stationary Tripod Position

1. Turn wheel/bolt and adjust action tripod neck to vertical position.
2. Screw camcorder onto action tripod neck securely.
3. Extend legs and place tripod on level surface.
   Note: Keep one hand on camcorder until tripod is stable.
4. Turn camcorder on. Adjust as necessary.

Support
www.theflip.com/support

Important Safety Information

• Please read these instructions carefully to learn how to safely use the Flip Video™ Action Tripod. This product has been designed for use with Flip Video camcorders only.
• 
  Never attempt to configure, adjust, or operate your camcorder while driving, biking or otherwise engaging in any potentially dangerous activity.