1. Manuals
  2. Brands
  3. TRAC Manuals
  4. Network Hardware
  5. WP838E
  6. User manual

TRAC WP838E User Manual

Hide thumbs

Advertisement

Table of Contents

User Manual
Model: WP838E
Page 1/10

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WP838E and is the answer not in the manual?

Questions and answers

Summary of Contents for TRAC WP838E

  • Page 1 User Manual Model: WP838E Page 1/10...

  • Page 2: Product Description

    Via one Giga-bit Ethernet port, the WP838E can connect to the backbone network through Giga-bit Ethernet interface. Besides, the WP838E also provides 802.3af/at PoE PD which is able to be powered by PoE switch remotely. The WP838E also supports DC12V power source option for the environment where PoE is not available.
  • Page 3  SPI NOR 32M Bytes  DDR2: 128MBytes Enclosure and Mechanical The dimension for the WP838E is as below:  PCB Dimension (L x W x D): 156×138.5(Note: this is the target dimension, will be inplemented at next stage)  ME Dimension (L x W x D): 177 × 155 × 42(Note: this is the target dimension, will be inplemented at next stage) ...
  • Page 4 Recessed ceiling-tile rail mounting adapter to comply with 15mm, 24mm, and 38mm rails  Optional mounting kit Wall-mount bracket for offset wall mounting, providing spacing between wall and unit Antenna and Wireless The WP838E shall deliver 3×3:3 wireless connections on both 2.4~2.4835GHz and 5.15~5.85GHz. Frequency: 2.4~2.4835GHz and 5.15~5.85GHz; ...

  • Page 5: Software Requirement

    The WP838E shall be powered by:  External power supply :12V DC, 2A(finalized by RD)  Power Over Ethernet (PoE 802.3 af/at) When multiple power sources are present, the WP838E power supply follows the priority: 12V DC>PoE 802.3 af/at Factory Default Reset...

  • Page 6: Performance Requirement

    Basically WP838E is supposed to support the below specific software requirements. Most likely customer will install owned SW rather than Lite-On’ SW, so that we only develop some necessary SW features so that we can present performance in demo show and also for certification.
  • Page 7 @2.4GHz, 2dB@5GHz) should be concerned as well, i.e. the below RF table is lower than WP838-i-AP. Table-04 WP838E TX capability @ 5 GHz (WM863_QCA9890) Target Power(dBm) Transmitter 802.11a 802.11n HT20 MCS 0,1,2,3,4,8,9,10,11,12,16,17,18,19,20 MCS 5,13,21 MCS 6,14,22 MCS 7,15,23 802.11n HT40...

  • Page 8: Environmental  Operating

    Table-06 WP838E Rx capability @ 5GHz (WM863) IEEE SPEC Receiver Sensitivity (dBm) 802.11a 802.11n HT20 MCS 0,8,16 MCS 5,13,21 MCS 6,14,22 MCS 7,15,23 802.11n HT40 MCS 0,8,16 MCS 5,13,21 MCS 6,14,22 MCS 7,15,23 802.11ac HT20 MCS8 @ 3/4 Code Rate...
  • Page 9  Humidity: 5 to 95% non-condensing  Storage and Transportation Temperature Range:  Temp: -40° C to +70° C (-40° F to +158° F) Page 9/10...

  • Page 10: Fcc Statement

    FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Table of Contents