SKAR Audio AGM SK-BATT65AH User Manual

INTRODUCTION
We take immense pride in the quality and reliability of our products. Skar Audio AGM High Performance
Batteries are built to withstand even the most demanding conditions, ensuring that they will stand the
test of time. Say goodbye to the inconvenience and frustration of battery failures, and welcome the peace
of mind that comes with our exceptional batteries.
CHARGE BATTERY BEFORE INITIAL USE
Before installing and wiring up your new Skar Audio AGM High Performance Battery, you will want to ensure that the battery
is fully charged. To do so you will need to connect your new Skar Audio AGM High Performance Battery to an AGM specific
charger that does not exceed 14.4v when charging. Once your AGM specific charger has completed the charging cycle, you
can now install your new Skar Audio AGM High Performance Battery.
DO NOT OVER-TIGHTEN BATTERY TERMINALS
Whether you are using the included automotive post adapters, bolts, or screws, do not exceed 8 ft-lbs max when tightening.
Over tightening can strip out the bolt holes and render your battery useless.
INSTALLATION INSTRUCTIONS
Make sure that the designated battery location is clear of any debris or obstructions, as the presence of such materials could potentially
result in sparking if the battery comes into contact with them.
Once you have successfully placed your new battery in its installation location, securely mount the battery to ensure it cannot fall over.
Skar Audio High Performance Batteries are designed to be universal and will fit in most automotive, truck, and marine applications.
Connect the battery leads to the correct terminals,
Reminder: Do not tighten the terminal bolts, screws, or automotive post adapters more than 8 ft-lbs when connecting battery leads.
If you are running a dual battery setup, ensure that the batteries are wired together in parallel which is
and (-) Negative to (-) Negative. Parallel will double the amperage output and reserve capacities. If you wire your batteries in series
(+) Positive to (-) Negative you will double the voltage output of your Skar Audio AGM High Performance Batteries.
which is
If this battery is being used as a secondary battery, please ensure it is properly grounded to the chassis (no plastic or painted metal, must
be bare metal) and proper fusing has been achieved.
SK-BATT65AH
USER MANUAL
(+) Positive lead to (+) Positive terminal
Skar Audio, Inc. | WWW.SKARAUDIO.COM
BEFORE INSTALLING
/ (-) Negative lead to (-) Negative terminal.
(+) Positive to (+) Positive
CAUTION
PLEASE READ