1. Manuals
  2. Brands
  3. SPM Manuals
  4. Safety Equipment
  5. LINEA'TOUCH
  6. Installation procedure

SPM LINEA'TOUCH LED Installation Procedure

Handrail
Hide thumbs Also See for LINEA'TOUCH LED:
Table of Contents

Advertisement

Quick Links

Download this manual
INSTALLATION PROCEDURE
LINEA'TOUCH LED HANDRAIL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LINEA'TOUCH LED and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for SPM LINEA'TOUCH LED

Summary of Contents for SPM LINEA'TOUCH LED

  • Page 1 INSTALLATION PROCEDURE LINEA’TOUCH LED HANDRAIL...

  • Page 2: Table Of Contents

    CONTENTS CONTENTS ......................... 2 BEFORE YOU BEGIN ....................3 COMPOSITION OF THE LINEA’TOUCH LED SYSTEM ..........4 TOOLS REQUIRED ....................5 TYPES OF WALL/INSTALLATION TECHNIQUES ............5 LED SYSTEM INFORMATION ................. 6 PREPARATION AND CUTTING TECHNIQUES ............7 ◼ 5.1 - MEASURING THE ALUMINIUM AND PVC PROFILE LENGTHS ....7 ◼...

  • Page 3: Before You Begin

    BEFORE YOU BEGIN  Before you install the LINEA’TOUCH LED handrail, the dimmable driver must be installed by an electrician (SPM dimmable 24 VDC 60 W constant voltage SELV unit or other unit sufficiently powerful for a 12 W/m LED band). ...

  • Page 4: Composition Of The Linea'touch Led System

    1. COMPOSITION OF THE LINEA’TOUCH LED SYSTEM Linea’Touch LED Trilobed LED band handrail with closer on 5 m reel continuous aluminium profile Ref. LD000BLC+B L. 4.00 m Ref. PVC sheathed: MEGLDPVC Decowood: MEPLDBOI Wire connector Anodised: MEALDSAA Ref. LD000SCO+COF Linea’Touch LED 55 mm quick- removable bugled bracket in Single connector silver anodised effect...

  • Page 5: Tools Required

    2. TOOLS REQUIRED Circular saw with 2.5 mm and 2 carbide blade for mm diameter aluminium and Allen keys Measuring tape Electrical and pencil insulating tape Drill and Screws and screwdriver expansion plugs 3. TYPES OF WALL/INSTALLATION TECHNIQUES  The table below shows the installation techniques to be used for the main wall surfaces found in the building industry.

  • Page 6: Led System Information

    1200 lm/m max Neutral white 4000K ≥ 0 Base Operating temperature -25°/45°C The dimmable driver is available as an option from SPM; it is a constant voltage SELV unit: Output voltage Uout 24 VDC Maximum power 60 W Maximum length Gradation technology...

  • Page 7: Preparation And Cutting Techniques

    5. PREPARATION AND CUTTING TECHNIQUES ◼ 5.1 - MEASURING THE ALUMINIUM AND PVC PROFILE LENGTHS  Measure each section of wall in order to cut and prepare the handrail lengths before installation.  At each end of the handrail, leave a clearance of at least 30 mm between the end of the handrail (with its wall return) and the end of the wall or door frame.

  • Page 8: Cutting The Aluminium And Pvc Lengths And Cutting The Made-To-Measure Accessories

    ◼ 5.2- CUTTING THE ALUMINIUM AND PVC LENGTHS AND CUTTING THE MADE-TO-MEASURE ACCESSORIES  Once the lengths of the aluminium and PVC profiles have been calculated, cut the profiles to length using a circular saw with an appropriate blade (preferably a fine-toothed blade in order to give a smooth edge).
  • Page 9  Connect the wire connector (driver side) to the LED band (peel the band adhesive on 1 cm to facilitate the connection). Comply with electrical standards: connect the red wire to the positive terminal and the black wire to the negative terminal of the LED band. ...
  • Page 10 brackets must be installed, space the brackets at no more than 1,200 mm intervals (use 800 mm intervals in areas of heavy traffice or on less robust wall surfaces such as plasterboard). To facilitate the bracket’s insertion, it’s possible to unscrew them slightly using a Allen Hex-key 2. 55 mm quick-removable bugled bracket To be positioned on top of the LED...
  • Page 11  Finally, fix the brackets and wall returns to the aluminium profile using the 2 mm and 2.5 mm Allen keys. Allen screws for fixing brackets and wall returns  Finally, cut the closer to the desired length and snap-fit it into the groove. Closer Linea’Touch LED Handrail Installation Procedure 2020-12-02 - 11 -...

  • Page 12: Installation With Angle Pieces

    ◼ 6.2- INSTALLATION WITH ANGLE PIECES  Refer to paragraphs 5.1 and 5.2 for calculating lengths and cutting the profiles.  Cut the necessary lengths of LED band. The band can be cut every 50 mm. Leave at least 35 mm without any band at each end of the profile, for the connectors and wall return.
  • Page 13  Insert the LED band(s) (and filters) into the groove in the profile(s). The LEDs on the band must be facing the floor. The bands and filters can be secured to each other with adhesive tape to facilitate insertion. Do not adhesivate the LED bands inside the groove. If coloured filter is used, hide the LED band located in the connector using electrical insulating tape.
  • Page 14  Slide the brackets into the groove in the aluminium profile on top of the LED bands. If several brackets must be installed, space the brackets at no more than 1,200 mm intervals (use 800 mm intervals in areas of heavy traffic or on less robust wall surfaces such as plasterboard). To facilitate the bracket’s insertion, it’s possible to unscrew them slightly using a Allen Hex-key 2 55 mm quick-removable bugled bracket...
  • Page 15 ▪ Position and assemble the angle with the 1 profile 90° external angle piece with integrated wire cable profile ▪ Position and assemble the wall return at the power supply side (pass the wire connector through the hole provided). Wall return Hole for the wire connector ▪...
  • Page 16 ▪ Insert the LED band, the brackets and coloured filters (option) into the 2 profil following the same procedure as seen before. ▪ Position and assemble the angle and the wall return with the 2 profil. 90° internal angle piece with integrated wire cable Wall return ...

  • Page 17: Profile-To-Profile Assembly

    Closer ◼ 6.3- PROFILE-TO-PROFILE ASSEMBLY  Insert the wire connector into the hole in the jointing piece and connect the single connector to the wires. Connect the connectors to the LED bands. Comply with electrical standards: connect the red wire to the positive terminal and the black wire to the negative terminal of the LED band.

  • Page 18: Drilling Height

    ◼ 7.1- DRILLING HEIGHT For a handrail height of 900 mm (measured at the handrail’s upper surface), the drilling height is 843 mm (900 - 57). ◼ 7.2- CONNECTING TO THE POWER SUPPLY  Check that the power supply is disconnected. ...

  • Page 19: Fixing

    ◼ 7.3- FIXING  Place the handrail against the wall. Allow a clearance of at least 30 mm between the end of the wall and the end of the handrail. This clearance will allow the wall returns to be replaced if necessary without disassembling the entire handrail.

  • Page 20: Service Duct

    8. SERVICE DUCT Driver Driver Driver • Lit zone Unlit zone Lit zone • The service duct kit is made on-site by cutting a section of handrail as long as the width of the service duct plus 100 mm (100 mm equals 2 x half the length of an assembly wedge). The cut may be at 45°...

  • Page 21: Maintenance

     Install the new LED band according to the installation guide (see sections 6 and 7). Offcuts and end-of-life electrical items must not be disposed of with ordinary waste, but must be sent to SPM International for recycling: SPM international S.A.S.

Table of Contents