OPERATING INSTRUCTIONS WARNING Do not attempt to assemble, connect to power source, or operate the Burrell Ultra- Thin Digital Mini Magnetic Stirrer without first reading these instructions. Also assure that each person that will operate this unit becomes familiar with these operating instructions.
6. Do not modify this unit or attach any accessory that is not included with the Ultra-Thin Digital Mini Magnetic Stirrer or is not an accessory manufactured by Burrell Scientific, LLC for this unit. 7. Do not use the stirrer if it, or its accessories, are damaged.
Fuels Water and Mild Detergent Please contact Burrell Scientific prior to using any other cleaning or decontamination method to ascertain that this method will not destroy the stirrer. Be sure to wear the proper protective gloves during the cleaning of the stirrer.
USING YOUR STIRRER 1. Place the stirrer on a stable, safe place. Plug in the power cord. 2. The LED Display will light up and will record the speed and time data of the last running. 3. Set the timing operation and continuous operation before stirring. To do so, switch the cursor to the time setting area by clicking the SHIFT button and set the value by using the INCREASE and DECREASE buttons.
25mm Stirring Bar SERVICE If assistance is needed, please contact Burrell Scientific for technical support. Please provide us with the following information: serial number, certification, description of problem (hardware or software), methods and procedures used to resolve the issue, and your contact information.
Need help?
Do you have a question about the B7788000-Each and is the answer not in the manual?
Questions and answers