Download Print this page

Synapptic UGREEN Bluetooth Headphone Transmitter Instructions

Download this manual

Bluetooth Headphone Transmitter

Instructions

Use the Bluetooth Headphone Transmitter to send audio from

your Synapptic USB Playback Speaker to wireless Bluetooth

headphones or ear pods.

This transmitter is only needed if you're using wireless

Bluetooth headphones. For wired headphones, simply plug

them directly into the speaker's 3.5mm headphone socket.

These instructions are a large-print summary. Please refer to

the original product instructions for full technical details and

safety information.

1. A quick tour of the device

The Bluetooth headphone transmitter is a compact unit,

measuring approximately 2 inches long, 1 inch wide, and half

an inch deep. At one end, there is a short wire with a 3.5mm

male headphone plug, which connects to your Synapptic USB

Playback Speaker. The opposite end features a USB-C port

used for charging the device. On the top surface, you'll find the

main function button, which can be identified by a small foam

Need help?

Do you have a question about the UGREEN Bluetooth Headphone Transmitter and is the answer not in the manual?

Page 1 2 inches long, 1 inch wide, and half an inch deep. At one end, there is a short wire with a 3.5mm male headphone plug, which connects to your Synapptic USB Playback Speaker. The opposite end features a USB-C port used for charging the device.
Page 2 bump for easy tactile recognition. On one side of the device, there is a small switch that allows you to select between transmit and receive modes. For sending audio to Bluetooth headphones, this switch should be set to transmit. 2. Charging The Bluetooth Transmitter contains a built-in rechargeable battery.
Page 3 Next, plug the transmitter’s 3.5mm headphone plug into the headphone socket on the back of the Synapptic USB Playback Speaker. This is the small round socket located opposite the oval-shaped charging socket.
Page 4 • Your headphones are powered on and in range • The 3.5mm plug is securely connected to the speaker For more help, refer to the full instruction leaflet included with the transmitter, or contact Synapptic Support at help@synapptic.com or telephone us on 0191 909 7 909.