Buyers 1744194 Mounting Instructions

Toolbox Mounting Instructions
1744194 & 1744196
Drop Door Topper Kits
To properly mount your storage toolbox please
review the following recommendations:
Installation Tools
• Gloves
• Protective Eyewear
• Fasteners
• 3/8" Drill
Installation
• Select a secure location to mount your toolbox.
• When attaching the box to a surface, use all 8
available mounting holes on the bottom of the box.
• If installing the included rubber feet, all 8 included
feet must be used to properly support the box.
• Mount the toolbox on a substructure that is solid
and strong enough to hold the toolbox and the
additional weight of its contents.
• Check the toolbox mounting regularly for wear and
to ensure that all hardware is secure
CAUTION
Always wear safety glasses when using power tools.
WARNING
Check for locations of brake lines and electrical wiring etc.,
before drilling any holes. Any damage to vehicle during
installation is installer's full responsibility.
Front View
Please read these instructions and warnings before installation.
CAUTION
This box has no lid. Take care that all contents are secured
before transport, with straps or similar to prevent discharge of
box contents.
CAUTION
Do not use this toolbox for the storage or transportation of
flammables, explosives, hazardous waste or materials such
as gasoline, solvents, gun powder, dynamite, propane tanks,
acetylene tanks or cutting torches. This toolbox is only intended
and safe for use in storing and transporting small tools and
equipment and/or other materials.
Fig. 1
1
www.buyersproducts.com
Phone (440) 974-8888
Fax 800-841-8003