Configuring Antivir Samba Scanner - AVIRA ANTIVIR UNIX SERVER User Manual

Configuration
Confirm with Y or Enter to start the Internet Update Daemon.
4.4

Configuring AntiVir Samba Scanner

AntiVir Samba Scanner consists of a VFS plug-in for Samba and a Scan Service. To use
AntiVir Samba Scanner, instead of the on access AntiVir Guard, you must install the VFS
plug-in (an AntiVir specific plug-in for samba-vscan software) as described in
on Samba
You have to activate AntiVir VFS Plug-in for the monitored shares in the Samba Service
configuration file smb.conf. The specification of a configuration file is optional. The new
entries to be made are, for example:
[myshare]
...
vfs object = vscan-antivir
vscan-antivir: config-file =
/usr/local/samba/lib/vscan-antivir.conf
Your distributor may have already carried out this step or you could use a configuration
interface to do this.
You can activate the scanner for single shares or for the entire server by making the
specific entries in the [global] section of the smb.conf file.
40
The script reports the saving of the configuration file. It displays information on
handling the Internet Updater:
* SUCCESS *
Configuration successfully saved to.
/etc/avupdater.conf
Press <ENTER> to continue.
Running Internet Update Daemon
==============================
In order for the Internet Update Daemon to be active
...
available options: y n
Would you like to apply the new configuration? [y]
The Daemon starts. If already running, it will automatically restart in order to
apply the new settings. Then the configuration is complete
Starting AntiVir: avupdater
...
AntiVir Status: avupdater running
Here are some commands that you should remember...
configure updater: /usr/lib/AntiVir/configantivir
start update daemon: /usr/lib/AntiVir/avupdater start
stop update daemon: /usr/lib/AntiVir/avupdater stop
update daemon status: /usr/lib/AntiVir/avupdater status
– Page 14.
Avira AntiVir UNIX Server
[ running ]
Integration
Avira GmbH