Jole miso Instruction Manual

2-in-1 swing and rocker

Advertisement

Quick Links

miso
2-in-1 swing and rocker
Instruction Manual
Swing – Weight: birth up to 25 lb. (11.5 kg)
Height: birth up to 30 in. (76 cm)
Rocker – Weight: birth up to 20 lb. (9 kg)
Height: birth up to 27 in. (69 cm)
product
guide videos
IMPORTANT!
Read the instructions in this manual before use of the product.
Keep this manual for future use.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the miso and is the answer not in the manual?

Questions and answers

Summary of Contents for Jole miso

  • Page 1 ™ 2-in-1 swing and rocker Instruction Manual Swing – Weight: birth up to 25 lb. (11.5 kg) Height: birth up to 30 in. (76 cm) Rocker – Weight: birth up to 20 lb. (9 kg) Height: birth up to 27 in. (69 cm)
  • Page 2: Table Of Contents

    Contents: Important: Warranty Information Product Registration Warnings Please fill in the information below. The model number and Parts List the date of manufacture are located on a label on the swing Assembling Swing frame. Fill out the prepaid registration postcard attached to Using Buckle &...
  • Page 3: Warnings

    WARNING WARNING Failure to follow these warnings and instructions Failure to follow these warnings and instructions could result in serious injury or death. could result in serious injury or death. FALL AND • When using as a rocker, DO NOT use the product when child begins trying to sit up, STRANGULATION reaches 20 lb.
  • Page 4 WARNING WARNING Failure to follow these warnings and instructions Failure to follow these warnings and instructions could result in serious injury or death. could result in serious injury or death. • Children have STRANGLED in loose or partially • Suffocation Hazard: Young infants have limited buckled harness straps.
  • Page 5 CAUTION CAUTION To prevent battery leaks, which can burn the skin To prevent battery leaks, which can burn the skin and eyes: and eyes: Keep the batteries out of children’s reach. Non-rechargeable batteries are not to be • • recharged. •...
  • Page 6 CAUTION CAUTION Changes or modifications to this unit not However, there is no guarantee that interference expressly approved by the party responsible will not occur in a particular installation. If this for compliance could void the user authority to equipment does cause harmful interference operate the equipment.
  • Page 7: Parts List

    Parts List: Parts List: Please make sure there are no missing parts. Please contact Joie Consumer Service if anything is missing. Night Light Motor Housing Seat Pad Seat Release Button Wheels Rocker Handle Toys Crotch Buckle Cover Vibration Module Base Assembly Infant Insert AC Adapter Handle Adjustment Button...
  • Page 8: Assembling Swing

    Assembling Swing: Insert motor housing into the base assembly. A “clicking” sound will confirm the motor housing and base assembly are properly locked in place. Pull up on the motor housing after attachment to ensure it is securely fastened. Press the left and right handle adjustment buttons at the same time.
  • Page 9: Using Buckle & Harness Straps

    Using Buckle & Harness Straps: 1 - Release Buckle: Locate the button in the center of the buckle and press it firmly to release the harness straps. 2 - Lock Buckle: Slide the shoulder harness buckle into the lap belt buckle (A).
  • Page 10: Rotating Seat

    Rotating Seat: position 1 position 2 position 3 Seat can be adjusted to 3 positions. The seat can be rotated by 180 degrees. Turn the seat by grasping the handle with both hands and turning left or right. IMPORTANT: Ensure that the seat is locked into one of the 3 possible positions.
  • Page 11: Adjusting Recline

    Adjusting Recline: Recline can be adjusted to 3 positions. Squeeze recline adjustment button on the back of the seat (A) and push down or pull up (B) to adjust the seat back to the desired recline position. IMPORTANT: Ensure that the seat is locked into one of the 3 recline positions.
  • Page 12: Using Rock-Stop Foot

    Using Rock-Stop Foot: Locate rock-stop foot on back of rocker. Rotate it fully down. This will keep the rocker steady. To allow rocking, rotate rock-stop foot upward fully. Using Vibration: Battery compartment is located behind the vibration module, under the seat pad. Remove battery cover using a flat-head screwdriver.
  • Page 13: Using Control Panel

    Using Control Panel: Battery compartment is located on the back side of the motor housing. Remove battery cover using a flat-head screwdriver. Insert four “D” alkaline, disposable, 1.5V batteries. NEVER mix battery types. Batteries are not included. Replace battery cover. Control Panel Icons: Main Power OFF/ON Nature Sounds...
  • Page 14: Using Ac Adapter

    Using AC Adapter: Find AC adapter jack at base of motor housing. Plug in small end of AC adapter cord. Plug the other end into your home’s wall outlet. IMPORTANT: If the top left light on the control panel is flashing blue, please check to ensure that you are using the correct AC adapter supplied by Joie.
  • Page 15: Using Toys

    Using Toys: To attach toys, thread the toy straps through the slots at the top of the handle. Using Infant Insert: To release the buckle, locate button in the center of the buckle and press it firmly to release the harness straps. To attach the infant insert, thread the shoulder and waist harness straps through the corresponding openings.
  • Page 16: Care And Maintenance

    Care & Maintenance: Cleaning: Storage: To wash seat pad and infant insert, refer to care tags on product. If the product is not in use for a long period of time, store DO NOT tumble dry. it where your child cannot access it. The product can be spot cleaned with a sponge and soapy Remove batteries before putting product into storage for water.
  • Page 17 IM-001450A...

Table of Contents