We're always happy to help! Why Choose AlkaWay? Founded in 2000, AlkaWay is an Australian-owned and operated company dedicated to providing high- quality water and wellness solutions. We believe that exceptional customer service is the foundation of a great experience. Our team is committed to continuous improvement and understands that every customers needs are unique.
BACK FRONT Unboxing Parts list a. Hydrogen generator 2-in-1 bath and inhalation machine b. Power cord c. Water outlet hose (black) d. Water inlet hose (silver) e. 2 x cannulas (1x oxygen and hydrogen, 1 x hydrogen) Small wrench shaped tool WARNING: check the surrounding environment, make sure the machine is placed in a ventilated and not less than 5m2 area.
Using the machine for the first time 1. Inspect the machine’s condition and ensure the hydrogen pipes are not bent. 2. Place the machine on a flat surface and secure all the 4 wheel locks as indicated on the photo below. 3.
INSERT SILVER HOSE INTO THE INLET INSERT BLACK HOSE INTO THE OUTLET How to use feature 1 (hydrogen bath operation) 1. Ensure the power cord is connected and the power switch at the back of the machine is turned on. 2.
Precautions 1. The machine must only be operated by adults. 2. Ensure that the inlet and outlet hoses are fully submerged in water while operating. 3. Do not use bath crystals, oils, or magnesium flakes while the machine is running, as these can block the hoses and cause damage.
Indicator Lights: • WORKING: The machine is functioning properly. • LOW WATER LEVEL: Add more water to the reservoir. • TDS WARNING: The water contains excessive TDS. Drain the machine and refill with low-TDS distilled water. • IMBALANCE: The machine is not on a flat surface. Adjust its position for proper operation.
• Press the button again to switch between 150 ml and 300 ml air volume. • Once you've selected the desired volume, press the on/off button to begin inhalation. 5. Recommended Usage: • We suggest 30 minutes of inhalation, but you may extend the duration as desired. Water Chamber Cannula vapour chamber captures excess water vapour...
How to drain water 1. Turn off the machine and disconnect it from the power source. 2. Position the machine above a sink or bucket to allow water to drain. 3. Unscrew the white knob at the bottom of the back of the machine and remove it. 4.
2. High TDS water was Contact us for after-sales service. used 3. Display malfunction If you run into any other problems or have any specific questions, contact your AlkaWay Customer Support Team on 1800 268 469 or email us at info@alkaway.com.au...
Need help?
Do you have a question about the CA-QY-52 and is the answer not in the manual?
Questions and answers