Advertisement
Quick Links
What's in the Box:
Fig. 1
Overview of controls:
Desired Function
Power-on
Power-off
Remove pairing record
Answer call/Hang up
Incoming call/in call
Reject call
Voice assistant
Mute on/off
Music pause/play
Next track/Previous
track
Switch call to earbud
Switch call to cellphone
NHT 0.2 Instructions (EN)
Current status
Power-off
Charging
Remove L and R earbud from the case
Power-on
Power-off
Incoming call
Touch and hold L or R for 1s，Activate voice
Standby mode
Calling
Music playing
Music playing
Talk on cellphone
Talk on earbuds
Operation/result
Touch and hold L and R for 1s.
Touch and hold L and R for 3s.
Place L and R into case,
Auto power-off, and charging.
Touch and hold L and R for 10s.
Tap L or R once.
Touch and hold L or R for 1s.
control.
Double tap L or R.
Tap L or R once
Double tap L, Previous track/
Double touch R, Next track.
Touch and hold L or R for 1s.
Touch and hold L or R for 2s.
1
LED
Prompt
Red LED will glow for 1s
Tone
Red LED will glow for 1s
Tone
Red LED will glow for 1s
Tone
Red LED will glow for 1s
White and Red LED
will alternate 3 times
in succession
/
Tone
/
Tone
/
Tone
/
Tone
/
/
/
/
/
/
/
/
/
/
Advertisement
Summary of Contents for NHT 0.2
- Page 1 NHT 0.2 Instructions (EN) What’s in the Box: Fig. 1 Overview of controls: Desired Function Current status Operation/result Prompt Power-off Touch and hold L and R for 1s. Red LED will glow for 1s Tone Power-on Charging Remove L and R earbud from the case...
- Page 2 (Try the following steps in the event of any connectivity issues) Search for “NHT 0.2 Wireless Earbuds” on your device; tap and choose to ignore or cancel pairing. While the earbuds are powered off, touch and hold the L and R earbuds for 10s until the LEDs alternate between red and white three (3) times to set the earbuds to factory default settings.
- Page 3 NHT directly (www.nhthifi.com) or an authorized NHT dealer in the USA or Canada. If (NHT) warrants that if the NHT branded product fails to function properly due to a manufacturing defect when it has been installed and operated according to instructions and used under normal conditions, it will be either replaced or repaired (both at NHT's option) with a unit of comparable value without charge to you.
- Page 4 FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Need help?
Do you have a question about the 0.2 and is the answer not in the manual?
Questions and answers