AT&T FiberLine Optic SC Installation Manual

AT&T Cabling Systems
AT&T FiberLine Installation Manual
Fiber Optic SC Rapid Connectors
for 250 Tight-buffered Fibers
AT&T P/N 29XFFNV001X-CCXX
For your safety operation
This product is designed and manufactured to assure
personal safety. Improper operation can result in
injury and in damage to the product.
Please read and observe all warnings and follow
the instructions detailed in this manual.
• Wear safety glasses before handling optical fiber
to protect the eyes. Small pieces of glass fiber are
very sharp and might get into the eyes or under
the skin and cause injury.
Never look into the end of a connector or an optical
•
fiber which may have a laser coupled to it. Laser
light may damage your eyes. Please note that
laser light is not visible.
Assembly kit
Fiber holder for 250 m fiber: 1 Unit.
Assembling Jig: 1 Unit.
Fiber Holder for
250 m fiber
Note: Different assembly kits are used for the different
connectors and fibers.
©AT&T Cabling Systems. All rights reserved. AT&T, the AT&T Globe Design and all other AT&T marks contained herein
are trademarks of AT&T Intellectual Property and /or AT&T affiliated companies.
Issue 1.0 1 February 2013
www.att.com/cabling
Assembling Jig
Precautions
1. Improper assembly will result in a loss of performance.
Please read instructions given in this operation manual.
2. The product is sensitive to dirt or dust. Do not take
connector out of the package until it is to be used.
3. The performance will be influenced by the cleaved fiber
surface condition. Please use a cleaver that has a good
blade.
4. Please insert the fiber into the connector slowly. If the fiber
is roughly inserted, it might be damaged or broken,
leading to product failure . Broken fiber could be scattered
in all directions.
5. Do not remove the dust cap until the connector has been
completely assembled.
6. A proper amount of index matching gel is applied in the
connector. Do not insert fiber more than once.
Optional assembly tools
1 Fiber cleaver
0.9 to 0.25mm 0.25 to 0.125mm
FiberLine
2 Jacket remover
2 Jacket remover