Pioneer BDP-430 System Firmware Update Instructions

System Firmware Update Instructions
For BDP-430 and BDP-LX54 (USB Update)
NOTE: If you have any difficulty carrying out these instructions, please first refer to the System
Firmware Update FAQ included in this document and/or contact Pioneer Customer Support Center.
A. Check the current firmware version of the player:
Using the player's remote control:
1. Press the "STANDBY/ON" button to switch the unit on.
2. If the player starts to play a disc, press the "STOP" button and wait until the Pioneer logo is
displayed on your TV.
3. Press the "HOME MENU" button to display the "Home Menu".
4. Use the cursor buttons (UP/DOWN) to select "SETTINGS", next press "ENTER"
5. Use the cursor buttons (UP/DOWN) to select "VERSION", next press "ENTER"
6. The firmware version of your player will be displayed in the center of the TV screen.
If the version number is PB11091601 or higher, it is not necessary to update the firmware.
If the version number is less than PB11091601, it is necessary to update the firmware. Please
continue to Step B.
B. Download the firmware ZIP file from Pioneer's website:
Download the file "BDP_430_ PB11091601.zip" from the website to a folder on your computer.
C. Create the System Firmware Update USB memory device:
USB memory device requirements:
- USB specification 2.0 and 32 MB or more in capacity
- Should be blank (should not contain any files)
PROCEDURE:
1. Connect the USB memory device to your computer.
2. Double click the ZIP file named "BDP_430_ PB11091601.zip" to open it.
3. Extract and save the file named "BDP430_121.iso" to a folder on your computer
4. Copy the iso file "BDP430_121.iso" to the USB memory device
5. Confirm the file name and the file size is correct on the USB memory device. To check the file
size in Microsoft Windows, select the file, press the right mouse button, and select
"Properties". If the file name and size do not match the ones listed below, perform steps B
and C again.
BDP430_121.iso
NOTE:
If the correct file is not copied to the USB memory device, your player will not recognize it as an
update USB memory device and you will not be able to carry out the update.
52,2Mbyte (54.779.904bytes)