Advertisement
Quick Links
Advertisement
Summary of Contents for fenceweb Wire Fence
- Page 1 Installation Manual Wire Fence...
-
Page 2: Personal Protective Equipment
Personal protective equipment. Double wire fence general manual... - Page 3 What is needed to install the fence? Double wire fence general manual Shovel / Rope / wire Socket wrench Tape measure Auger Angle grinder (Rubber) Hammer Level Wrench...
- Page 4 Check and unpack your order. Double wire fence general manual Your order will most likely arrive flat on a pallet. Depending on the size of your order, more pallets may arrive. Check the goods upon delivery and note any damage on the consignment note before signing.
- Page 5 Overview Double wire fence Double wire fence general manual WASHER Distance between posts DETAIL ASSEMBLY CENTER TO CENTER 2580mm CORNER POST CENTER TO CENTER 2580mm Distance from center Distance between to center posts Bolt *Center to center is the distan-...
- Page 6 Preparation: Numbers tell the tale. Double wire fence general manual Level the ground at the location where the fencing will be placed. Free up enough space to work properly. Determine the starting point of your fence. This starting point must not be able to change in dimensions later.
- Page 7 Assembly: The first post. Double wire fence general manual Dig or drill a hole of approximately Place the post in the hole. Secure the post with (quickdrying) 12” x 12” where the first post is Check if it is level and place it against concrete.
- Page 8 Assemble The second post, prepare the first fencepanel. Double wire fence general manual We recommend installing the fencing by installing Measure from the first post with a fence or with a one post and fencepanel at the time. So don’t start batten where the second post should be, dig or drill with placing the posts and then the fences.
- Page 9 Assembly: securing the brackets. Double wire fence general manual Slide the correct amount of end brackets over the post (depending on the height of the fence) and slide the fencepanel between the bracket far enough so that the tabs of the bracket are over two bars.
- Page 10 Assembly: Intermediate brackets. Double wire fence general manual After assembling the first fencepanel, must be placed between the brackets at the same time. Place the second fence against the post and place one intermediate bracket part against one side of the fencepanel.
- Page 11 Assembly: Level the fence and tighten the brackets. Double wire fence general manual Go back to the first fencepanel. Then tighten the nuts tightly When all fences are levelled Keep the fence at the correct with a socket wrench or wrench.
- Page 12 Assembly: Shorten a fence panel. Double wire fence general manual If you want to place a fencepanel that needs to be shortened, you can shorten it with an angle grinder. Use the spray can to paint over the grinded part of the...
- Page 13 Assembly: Final step Double wire fence general manual As a final step, place the caps on the posts.
- Page 14 Congratulations! Your fence is up! Double wire fence general manual Did you find this manual useful? We would love to hear your feedback! Do not forget to take pictures of your fence and send them to: business@fenceweb.com Or post them with #fenceweb...
Need help?
Do you have a question about the Wire Fence and is the answer not in the manual?
Questions and answers