User Manual Hazard Statements • Read the Manual: Before using your Beverage Dispenser for the first time, carefully read the user manual . It will contain specific instructions, safety tips, and cleaning guidelines . • Placement: Situate your Beverage Dispenser on a stable, level surface away from heat sources or direct sunlight .
User Manual Initial Setup • Inspect the Packaging: Inspect the exterior of the packaging to check for any signs of damage that might have occurred during shipping . If the unit has been shipped horizontally or at an angle, wait 8 hours before turning on to allow cooling circuit to reset .
Page 5
User Manual Line Installation: • Unplug the Machine: Ensure the machine is unplugged . • Use Food Grade CO : Only use food-grade CO cylinders with a proper pressure regulator . • Regulator Connection: Connect the regulator output to the port labeled "CO IN"...
User Manual Cleaning Preparation: • Remove and replace filter before cleaning . • Turn off machine using the power switch located on the back to avoid dispensing water while cleaning . • Clean external surfaces of the machine, drip tray, and dispensing nozzle . Cleaning Non-Electrical Parts: •...
User Manual Maintenance Regular Cleaning Daily Wipe Purpose: To prevent the buildup of food particles, grime, and bacteria, which could affect the quality of the beverages and the machine's overall performance . 1 . Turn off the machine and disconnect it from the power source . 2 .
Page 8
User Manual Yearly Filter Change Purpose: To prevent dust and debris from clogging air inlets, potentially causing the machine to overheat . The filter should be changed after 1 year of use or when maximum filter gallon capacity is reached. 1 .
User Manual Troubleshooting Problems Solutions Confirm that all external water valves are in the “ON” position . Water not dispensing . Confirm that the power switch is in the “ON” position . Replace filter . Low flow . Confirm that all external water valves are fully in the “ON” posi- tion .
Need help?
Do you have a question about the 23BCWD8 and is the answer not in the manual?
Questions and answers