Kentix KXC-WA1 Installation Manual

Wall reader (radio) DoorLock-WA1 – MANUAL | 1
ORDER-CODES:
KXC-WA1
DATASHEET KXC-WA1
Overview
The radio wall reader expands the application range of Kentix Smart Access to include other fields of
application such as factory gates, doors with motor control or barriers. It fully integrates with the
Smart Access series with radio knob and radio lever handle. Integration, configuration and operation
are analogous to the components listed above. Here, too, online or offline operation is possible. The
wall reader already has its own relay, in online mode this can control one of 2 relays in the respective
AccessPoint.
Safety instructions
Installation
Installation and commissioning may only be carried out by trained specialist personnel in accordance
with the instructions.
No modifications of any kind, other than those described in an appropriate manual, are permitted to
Kentix GmbH products.
Certain levels of protection must be provided when installing Kentix equipment.
Observe the relevant regulations for installations in the respective environment.
Only operate the products within the defined temperature range.
The instructions should be passed on to the user by the person carrying out the installation.
Kentix accepts no liability for damage to the equipment or components resulting from incorrect
installation. No liability is accepted for incorrectly programmed units.
Kentix shall not be liable in the event of malfunctions, damage to property or other damage.
Use of the products, transport and storage
Protect the device during transport, storage and operation from
Protect moisture, dirt and damage.
© Kentix GmbH. This file was automatically generated on 2024-12-30 01:54:10. Please visit docs.kentix.com for the
latest documentation.