Advertisement
Table of Contents
Advertisement
Table of Contents
Summary of Contents for JDS SDN-600HT
- Page 1 SDN-600HT Manual JDS INC...
- Page 2 ⑨ Start button : on/o , set a time(min.,sec) ⑩ LCD panel : display the current value. RUN: operation mode 100% : display the current output OFF20m 100% 36.5kHz OFF: Sequence operation mode 36.5kHz : Current frequency ON20m : set a time (20min.) JDS INC...
-
Page 3: Specifications
The stainless main body has anti-chemical characteristics and strong durabilities. SPECIFICATIONS Inside diameter Spec. Ultrasonic frequency Outside diameter(WxLxH) Capacity Ultrsonic output (WxLxH) Model SDN-600HT 40KHz 400×300×250 480×380×350 600W Spec. Ranges Power Materials Heater Spare parts... -
Page 4: How To Operate
▶How to set the time -In case of setting time (0-90min) 1) Connect the power. Wait OFF20m MUJIGAE 2) Push 7 the Down button to move Wait ON 20m the mode of Off to On on the LCD. MUJIGAE JDS INC... - Page 5 MUJIGAE 7) Push 9 the Start buttonto operate ON25s ultrasonic. 100% 36.5kHz -Select the On or Off mode of ultrasonic by the Foot s/w. 8) Push the Sweep button to start SWEEP ON25s the sweep mode. 100% 36.5kHz JDS INC...
- Page 6 - Ask A/S service since damaged with the ultrasonic generator. Display "overload" - Off the power and reset. on the LCD - Ask A/S service since damaged the ultrasonic generator. JDS INC 42 Andrews Road Hicksville, NY 11801 Tel] 516-868-6045 Fax] 561-932-1723 jdsinc.bb@gmail.com...
Need help?
Do you have a question about the SDN-600HT and is the answer not in the manual?
Questions and answers