Advertisement
Quick Links
Advertisement
Related Manuals for Jizhida Technology J688
Summary of Contents for Jizhida Technology J688
- Page 1 Model:J-688...
- Page 2 This set includes 2 walkie-talkie units: these are communication devices which operate on mobile radio frequencies. They come with 8/1 6/20/22(option) channels as well as a back-lit LCD screen, enabling you to communicate over several kilometers free-of-charge (up to 3 km in open areas) NOTE: Please read these user instructions carefully before using the equipment and retain for future consultation!
- Page 3 USING THETWINTALKER 1.Turning the device on/off To turn the devices on or off, hold down the power on/off button (6) for 3 Seconds a BEEP sound will be played to confirm. 2.Adjusting the volume To increase the volume, press the Up adjustor button (4) land press the Down (7) button to decrease volume.
- Page 4 -The other device must be set to the same channel and have set the same CTCSS code (see point 7) 5.Changing Channels ●Press the MENU button (11) once, the current channel number flashes on the display. ●Press the▲- button (4) or the-▼button (7) to change the channel.
- Page 5 (level 3 is the most sensitive level), ●Press the TALK-button (15) to confirm and return to stand-by mode. 9.Scanning for an active radio channel ●Press and hold Button (20): The 'Scan' function indicator (17) will appear on the screen and the channel (18) will scan continuously from 1 to 8/1 6/20/22.
- Page 6 roger beep to confirm that you have stopped talking. To set the Roger Beep. ●Press the MENU- button (11) six times. “ro” will be displayed. ●Press▲to enable (ON) or▼disable the Roger Beep (OF). ●Press the TALK - button (15) to confirm your selection and return to the standby mode.
- Page 7 462.5625MHz~462.7125MHz 462.5500MHz~462.7250MHz 467.5625MHz~467.7125MHz 12.5KHZ...
- Page 8 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Need help?
Do you have a question about the J688 and is the answer not in the manual?
Questions and answers