Advertisement
Quick Links
Advertisement
Related Manuals for Calix GigaPro p6dx
Summary of Contents for Calix GigaPro p6dx
- Page 1 GigaPro p6dx (GPR2022H) Installation Guide May 2024 #220-01347-10...
- Page 2 Installing Power and Network Cables ................31 Chapter 3: Final Setup and Activation ..Error! Bookmark not defined. Powering up the System ............. Error! Bookmark not defined. Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved.
- Page 3 System LED Behavior - Mesh (Satellite) Mode ..Error! Bookmark not defined. System Specifications ......Error! Bookmark not defined. Agency Listings ........Error! Bookmark not defined. Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved.
- Page 4 Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved.
- Page 5 Chapter 1 GigaPro p6dx (GPR2022H) Product Overview This chapter introduces the Calix GigaPro p6dx (GPR2022H) outdoor Wi-Fi access point (AP) system and provides an overview of installation considerations. Topics Covered This chapter covers the following topics: Introducing the GigaPro p6dx outdoor Wi-Fi AP system ...
- Page 6 Introducing the GigaPro p6dx outdoor Wi-Fi AP System The Calix GigaPro™ p6dx is a Wi-Fi 6, dual-band, long range outdoor system. The p6dx offers 120° coverage for over 1.5 miles, bringing high-bandwidth services to buildings, equipment, devices, and sensors. This intelligent outdoor rated, high-performance system supports multi-Gigabit throughput for streaming video and data services.
- Page 7 REVENUE EDGE PLATFORM As part of the Revenue EDGE family, the GigaPro p6dx uses the world’s only hardware independent, modular, standards-based, software platform. With the Revenue EDGE, service providers can use the containerized architecture to quickly deploy new services that leverage a range of pre-integrated value-added solutions (e.g., enhanced parental controls or home network security).
- Page 8 Height: 13.8 in (35.0 cm) Depth: 3.86 in (9.8 cm) Weight: 7.3 pounds (3.3 kg) GPR2020H (p6dx) Dimensions Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved.
- Page 9 Depth dimension with wall mount bracket Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved.
- Page 10 Pole Mount Dimensions - Fully Tilted Asked Chris on 4/26 to provide this image. Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved.
- Page 11 Each port requires fittings to be assembled as shown below. Doing so ensures that cabling is properly protected and that the openings remain weather resistant. p6dx Entry/Exit Fittings Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved.
- Page 12 P6dx input locations Powering Options The GigaPro p6dx system supports two options for power: Local AC power: You can power the system via a standard AC power outlet using a Calix power adapter cable. Power over Ethernet (PoE): You can line-power the system via the Ethernet uplink data cable ...
- Page 13 à UL. Connectez le Point d’accès au réseau PoE sans routage vers l’usine extérieure The GigaPro p6dx system includes an 802.3bt Power over Ethernet (PoE) Powered Device (PD). The system accepts PoE power via an Ethernet data cable connected to its WAN uplink port.
- Page 14 PSE and the PD. Ground the ESP to ensure proper safety, equipment protection, and performance. Mounting Options Calix provides a wall/pole mount bracket in the giftbox of the GigaPro p6dx. In either case, the installation steps are almost identical save for the medium the p6dx attaches to. Installation Considerations Review the following considerations and guidelines before starting installation activities.
- Page 15 Note: Calix recommends connecting the p6dx system to an ONT equipped with a 2.5GE LAN port to provide maximum uplink bandwidth. Typically, this means using an XGS-PON ONT (many equipped with 2.5GE LAN ports) or 10GE AE ONT. For example, the Calix GP4200A outdoor ONT is commonly used for this application.
- Page 16 Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved.
- Page 17 Chapter 2 Installing the GigaPro System This chapter describes how to install the GigaPro p6dx system hardware in an outdoor location. This process includes guidance for identifying an appropriate installation location, system hardware installation instructions, and cabling instructions. Topics Covered...
- Page 18 Unpacking the System Each GigaPro p6dx system ships in a box that contains the following items: (1) GigaPro p6dx (GPR2022H) system (2) M25 interface fittings (1) M32 interface fitting (1) Ground Lug (1) M4 x 8mm ground lug screw ...
- Page 19 Remove the p6dx ONT from the carton and set aside Remove the cardboard that secures the mounting bracket inside the carton Remove the mounting bracket and set aside Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved.
- Page 20 Ethernet cables). For wireless connections, the maximum distance from the RG may vary from site to site based on environmental factors that affect signal strength. As a general rule of thumb, Calix recommends locating satellites at a distance where they can receive a signal of -60 dBm or better.
- Page 21 Ethernet cable described above apply here. If the ONT's LAN Ethernet port providing the link is PoE powered (for example, from a Calix GP4200A ONT's 2.5GE port), the maximum distance must be 328 feet / 100 meters. If using a PoE injector, that distance can be up to twice as far.
- Page 22 Installing the System on a Wall/Pole Use the Calix wall/pole mount bracket to install the GigaPro p6dx system on a wall or pole, or other vertical flat surface. Installing the mounting brackets involves first attaching the front bracket to the p6dx and then attaching the wall mount bracket to the front bracket.
- Page 23 2. Install the rear mounting bracket to the back of the p6dx using the (4) M6 x 12mm mounting bolts. Note: Ensure the location you select accommodates the length of the power cord with respect to the power outlet. Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved.
- Page 24 Note: In the example shown below, the rear bracket is attached to the ONT using (4) M6 x 12mm screws. Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved.
- Page 25 4. Attach the completed assembly to the wall using fasteners appropriate to your environment. Note: A gap exists between the wall and the mounting holes on the front bracket as shown below. Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved.
- Page 26 Slip the hose clamp around the pole, and then re-tighten the hose clamps until tight. Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved.
- Page 27 Pole Mount Components Once complete, the completed pole mount installation will look similar to the below drawing. Completed Pole Mount Configuration at 30° Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved.
- Page 28 2. Connect the ground cable to the p6dx chassis as follows: a. Position the ground lug against the p6dx chassis ground terminal (located on the back of the unit). Grounding the p6dx Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved.
- Page 29 MEM using a #8-32 phillips head screw with external tooth washer. For installations requiring a bonding conductor of #6 AWG copper or equivalent, Calix offers a Ground Lug Kit (included). This kit includes a ground lug and a #8-32 x 7/16-inch phillips head screw and external tooth washer.
- Page 30 If the ground is interrupted or disturbed in any way, an unsafe condition will exist. Calix best practice Calix requires use of an earth ground circuit (earth electrode) at the installation site to provide protection from electric shock for equipment and personnel. The ground circuit may consist of a simple copper rod driven into the earth or a complex system of buried rods and wires.
- Page 31 Installing Power and Network Cables After mounting the GigaPro p6dx system on a wall or pole, and after establishing a ground connection for the system, you must connect power and/or network cables to the system before completing the installation. The type and count of cables to install for the p6dx system may vary from site to site depending on several factors, including the powering option selected and the operating mode of the Wi-Fi AP.
- Page 32 2. Dress and secure the cable(s) using cable ties or velcro straps. *Note: Before proceeding, Calix recommends verifying that the p6dx system powers up properly and comes into service as expected. Continue to the next chapter "Final Setup and Activation" to perform these tasks before completing the installation.
- Page 33 Proprietary Information: Not for use or disclosure except by written agreement with Calix. © Calix. All Rights Reserved.
- Page 34 • Maximum environmental values during use: Outdoor ambient temperature with Calix enclosure –22 to 158° F, (–30° C to +70° C), 5%~95% non- condensing, Altitude: –200 to • 6,000 feet (@40° C) and 6,000 ft to 10,000 ft (@30° C) REQUIRED SAFETY STATEMENTS •...
- Page 35 WARNING! Do not use any other power adapter except the one that accompanies this unit or a power supply identifi ed in the list below. Use of another adapter could result in damage to the unit. To prevent electrical shock, please do not open the cover. The following power adapter is qualifi ed for use with this GigaSpire.
- Page 36 CALIX, INC. AND THE ENVIRONMENT At Calix Inc., we understand and a re committed to reducing any impact our operations and products may have on the environment. To minimize this impact, Calix Inc. designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging.
- Page 37 Το πλήρες κείμενο της δήλωσης συμμόρφωσης ΕΕ είναι διαθέσιμα στο διαδίκτυο από την ιστοσελίδα Calix Δηλώσεις (https://www.calix. com/declarations). Par la présente, Calix Inc. Cet accès qui déclare haut débit sans fi l terminal est conforme à la directive 2014/53 / UE. Le texte intégral de français [French] la déclaration de conformité...
Need help?
Do you have a question about the GigaPro p6dx and is the answer not in the manual?
Questions and answers