Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Eminent EM8037
Summary of Contents for Eminent EM8037
- Page 1 EM8037 Wi-Fi Powerline Adapter Starter Kit...
-
Page 2: Table Of Contents
Please keep this manual and the receipt in a safe place. Register your product now on www.eminent-online.com and receive product updates! 1.1 Packing contents The following parts need to be present in the packing of the EM8037: • 1 EM8036 Wi-Fi Powerline •... -
Page 3: Connecting The Powerline Adapters
ENGLISH 2.0 Connecting the Powerline Adapters Note: For the best performance, connect the powerline adapters directly to the mains. Don’t connect them to an extension cable or a power strip. Note: Please make sure the ON/OFF switch on the right side of the adapter is in the upper position, so the EM8036 is switched ON. -
Page 4: Connect By Wps
ENGLISH To make a wireless connection with the WiFi powerline adapter, please select the “Eminent_Wifi” wireless network. You will be asked to enter a password. Please fill out the password you have wrote down above. Note: You can connect a maximum of 16 Powerline adapters in your network. 2.1 Connect by WPS Please follow the steps below to connect your device to the WiFi powerline adapter by WPS:... -
Page 5: Add A New Unsecured Powerline To Your Already Secured Network
ENGLISH Use the following steps to secure the powerline adapters: In the bottom field of the ‘PLC Utility’ you can choose a Powerline adapter from the list, where no value is set in the ‘Password’ column. Click ‘Enter Password’. Fill out the ‘Password’ or ‘Device ID’, and click ‘OK’. The ‘Password’ or ‘Device ID’... -
Page 6: Reset The Powerline Adapter
ENGLISH 4.0 Reset the powerline adapter To reset the powerline adapter to factory defaults, please follow these steps : 1. Press the ‘NID/RST’ button. 2. Keep the button pressed for 10 to 15 seconds. 3. Release the button. 4. All LED indicators with switch Off and the powerline adapter will reboot. 5.0 Change network name and password To change the WiFi network name(SSID) and the WiFi-key, connect your WiFi powerline adapter to a computer and follow the steps below :... - Page 7 ENGLISH 8. Since the EM8036 has its own IP-Address, you need to manually fill out the IP- settings. You can fill out the following IP-settings as shown in the following image:...
- Page 8 ENGLISH 9. After filling out the IP-Address settings, click ‘OK’ and close the screen. 10. Open your computer’s web browser and fill out ‘http://192.168.10.250’ in the address bar and press the ‘Enter’ key. 11. The following login screen will be showed. 12.
-
Page 9: Led Indicators
ENGLISH 14. Fill out the new network name at “Name (SSID)”, and fill out the new password at “Password” 15. Press “Done” 16. The Wi-Fi powerline adapter will now reboot. New settings are active once the device has rebooted completely. 6.0 LED indicators On : Power on Off : Power off... -
Page 10: Frequently Asked Questions And Other Related Information
The latest Frequently asked questions for your product can be found on the support page of your product. Eminent will update these pages frequently to assure you have the most recent information. Visit www.eminent-online.com for more information about your product. -
Page 11: Warranty Conditions
Eminent products. Eminent products with an internal hard disk have a limited warranty period of two years on the hard disk. Eminent could not be held responsible for any data lost. Please make sure that if the product stores data on a hard drive or other memory source, you will make a copy before you return the product for repair.
Need help?
Do you have a question about the EM8037 and is the answer not in the manual?
Questions and answers