Page 2
Suction Cup * 4 pcs Pet Toy Push IQ * 1 pcs Brush * 1 pcs...
Page 3
Suction Cup Installation Instruction a1 Insert the suction cup into the big hole at the bottom. a2 Move the suction cup from the large hole to the small hole at the edge to secure the suction cup. Once completed this is what the suction base looks like...
Page 4
Adding Treats b1 Open the top round cover upwards to open the treat entrance. b 2 Add pet treats from the top. b3 After adding treats, align the top round cover press down to the intermediate position to finish adding treats. Press down for treats to drop out.
Page 5
Cleaning Instruction c1 After all the treats have , remove the top round cover. been exhausted c2 Wash the inner wall of the product directly with water. c3 The brush can be bent to a suitable angle to assist in cleaning the inner wall of the product.
Need help?
Do you have a question about the Pet Toy Push IQ and is the answer not in the manual?
Questions and answers