BRIO Air Purifier Quick Start Manual

®
BRIO Quick Start Guide
BEFORE FIRST USE:
• Some shifting may happen during shipping, so after removing Brio from the
packaging, open the rear panel door to check that components are fully pushed
into the unit. Replace the panel door.
•Read the Important Safety Information in the Brio User Guide (pages 6-7).
TO OPERATE:
1. Place Brio in the selected location
and plug the power cord into an
electrical outlet.
2. Press the Power button on the
Control Panel to start Brio.
3. Press the Power button to change
the fan speed or to turn the power off.
The fan speed will be indicated by
Control Panel lights. When the power
is off, all fan-speed indicator lights on
the Control Panel will be off.
That's it! Your new Brio Air Purifier is now improving your indoor air quality,
trapping and removing airborne particles and pollutants.
Be sure to read the care instructions on the reverse side of this page.
Complete instructions can also be found on page 11 of the Brio User Guide.
LOW
POWER
Control
Panel
MEDIUM
better indoor air by design
Control Panel Display
HIGH
CHECK/CHANGE