Do you have a question about the 2 in 1 Alarm Sitter On Cue PRO and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Posey 2 in 1 Alarm Sitter On Cue PRO
Page 1
Ensure all parts of this system are operational before leaving a patient unattended. 8645 MADE IN CHINA Before using the Posey 2 in 1 Alarm Sitter On Cue PRO, read this entire manual and save for future reference.
Before You Begin Contents The Posey 2 in 1 Alarm Sitter On Cue PRO is an easy to use addition to Before You Begin ................... 3-4 your falls management program. The 2 i n 1 Al a rm Sitter On Cue PRO Features of the 2 in 1 Alarm Sitter On Cue PRO ........
Features of the 2 in 1 Alarm Sitter On Cue Features of the 2 in 1 Alarm Sitter On Cue PRO (Cont.) (Cont.) Nurse Call Interface. Provides alarm notice at patient’s room • • Eight alarm tones. There are eight alarm tone options which can be and nurse call system notification points.
Each Alarm Sitter On Cue PRO is Shipped to Preparing the 2 in 1 Alarm Sitter On Cue PRO 2 in 1 You With: for Use • Fall Monitor (1) Battery Installation: “AA” Alkaline batteries (4) • Fresh alkaline batteries have an •...
Page 6
Preparing the 2 in 1 Alarm Sitter On Cue PRO for Use Preparing the 2 in 1 Alarm Sitter On Cue PRO for Use (Cont.) (Cont.) The Status LED will flash different colors providing a visual indication of the current state of the alarm.
Page 7
(failsafe). resolve the failsafe alarm. The Status LED will flash different colors providing a visual indication of the current state of the fall monitor. 2 in 1 Alarm Sitter On Cue PRO 2 in 1 Alarm Sitter On Cue PRO...
Ensure the nurse call cable is plugged into both the fall monitor and the wall port of the nurse call 2 in 1 Alarm Sitter On Cue PRO has four (4) alarm modes. system or that the wireless adapter is paired These allow you to select an alarm notification best suited to properly before leaving the patient unattended.
Setting Alarm Tone Adjusting Alarm Volume The 2 in 1 Alarm Sitter On Cue PRO has eight (8) available tones. This There are three (3) alarm volume settings: low, medium and high allows you to differentiate between patients and other equipment (default setting).
• If there is no weight on sensor, or sensor belt is not fastened, alarm will be in Ready state and status LED will flash yellow. 2 in 1 Alarm Sitter On Cue PRO 2 in 1 Alarm Sitter On Cue PRO...
Nurse Call Interface (Optional) You can connect the 2 in 1 Alarm Sitter On Cue PRO to your facility’s The Posey 2 in 1 Alarm Sitter On Cue PRO is equipped with an AC nurse call system when you connect the optional Nurse Call Cable or power adapter input to allow you to use AC power to operate the fall wireless Nurse Call Adapter.
• For Wireless Nurse Call Adapter: See IFU provided with the Nurse sensor or the sensor belt is reattached the 2 in 1 Alarm Sitter On Cue PRO Call Adapter for instructions on pairing the adapter to the fall will stop signaling the nurse call system.
(Cont.) NOTE: Wireless sensors will also be unpaired from the fall All Posey wired and wireless sensors are compatible with the 2 in 1 Alarm monitor when it is powered off or if the sensors lose Sitter On Cue PRO. Consult the IFU included with the sensor for complete setup instructions.
During this time the STATUS LED will flash red. 4. After 30 seconds, and the patient is off the sensor pad, the alarm will remain in the Ready state. 2 in 1 Alarm Sitter On Cue PRO 2 in 1 Alarm Sitter On Cue PRO...
The 2 in 1 Alarm Sitter On Cue PRO and Use of Physical Mounting the 2 in 1 Alarm Sitter On Cue PRO Restraints If the patient’s care plan calls for the use of a restraint, staff should There are multiple mounting options to choose from for the 2 in 1 Alarm read and follow all instructions and warnings for the restraint.
Remove batteries when storing the fall monitor for an extended • Power off the Fall Monitor and wait 10 seconds. Power on Fall period to prevent depleting the batteries and potential corrosion. Monitor. 2 in 1 Alarm Sitter On Cue PRO 2 in 1 Alarm Sitter On Cue PRO...
Page 17
Power off the Fall Monitor and wait 10 seconds before powering back on. SOLUTION: • Contact customer service. • Replace batteries in Nurse Call Adapter or use AC adapter. 2 in 1 Alarm Sitter On Cue PRO 2 in 1 Alarm Sitter On Cue PRO...
Page 18
• Try a different position for the sensor pad, such as on top of the cushion. 2 in 1 Alarm Sitter On Cue PRO 2 in 1 Alarm Sitter On Cue PRO...
Page 19
Low battery LED flashes red and audible cue will say “Low battery” when batteries need changing Warning Nurse Call Latching and non-Latching modes. System default Configuration is non-latching. 2 in 1 Alarm Sitter On Cue PRO 2 in 1 Alarm Sitter On Cue PRO...
(4) years after date of manufacture (the monitor. It is the first two digits of the serial number. If fall “Warranty Period”), that the Posey 2 in 1 Alarm Sitter On Cue PRO monitor is found to be beyond 4 years from manufacture, please (“Fall Monitor”) is free of defects in materials and workmanship.
Page 21
2 in 1 Alarm Sitter On Cue PRO Instruction Manual Posey Medical Device (Dongguan) Co., Ltd. Tel:+86-769-82770458 www.poseyhealth.com 8645 Rev A 2024-8-20...
Need help?
Do you have a question about the 2 in 1 Alarm Sitter On Cue PRO and is the answer not in the manual?
Questions and answers