Subscribe to Our Youtube Channel
Related Manuals for Pyramid MCL 7000
Summary of Contents for Pyramid MCL 7000
- Page 1 MCL 7000 Installation Manual 45 Gracey Avenue, Meriden, Connecticut 06451 Toll Free (US and Canada): 888-479-7264 or Phone: 203-238-0550 Fax: 203-634-1696 Web Site: www.PyramidTechnologies.com I-2020D...
- Page 2 Introduction Congratulations on purchasing the 7000 Master Control. This system synchronizes up to 15 clocks off of a single zone. Expandable to 4 bell zones and each zone supports up to 50 events. Installing the Model 7000 Master Control The 7000 can be used without a PC for 1 zone with up to 300 bell events. If you will be using the 7000 Master Control as a stand-alone device without utilizing a PC to set up the bell schedule, you will proceed with the following steps.
-
Page 3: Setup Instructions
Set-up Instructions 1. To change or set a feature, press the SELECT button until the desired feature is displayed. 2. Use the UP and DOWN button to change the feature. 3. After the display feature is changed, press the SELECT button to change other features and to return to the main display. - Page 4 DATE FMT = USA (date format)-Use the UP or DOWN key to select USA or EURO (European) display format for time. SET YEAR – Use the UP or DOWN key to set the desired year. SET MONTH – Use the UP or DOWN key to set the desired month. SET DAY –...
-
Page 5: Installing The Software
Explorer 6.0, please run the IE6setup.exe file located in the IE6 directory on the MCL 7000 series CD. Getting Help For additional help on setting up and running the MCL 7000 series system, see the PC- based help system included in the software or contact Pyramid's Customer Service Group. - Page 6 Logging on to the MCL 7000 The Username ADMIN and the Password PTI must be used to log into the MCL 7000 for the first time. (Please keep in mind, this screen is case sensitive) This is the System Administrator Username and Password.
- Page 7 If there is a problem where the system believes the time entered is incorrect, a new screen will appear posing the question and giving the option of changing the time or determining that the information entered was correct and to continue. Setting up Bell Schedules To set up a bell schedule: •...
- Page 8 All warranty repairs must be done by Pyramid Technologies, LLC. Any repair to the equipment other than by PTI voids the warranty. Users in countries other than the USA should contact the Dealer from whom the unit was purchased.
Need help?
Do you have a question about the MCL 7000 and is the answer not in the manual?
Questions and answers