Download Print this page
Dahua PFM341-9CH User Manual
Dahua PFM341-9CH User Manual

Dahua PFM341-9CH User Manual

Advertisement

Quick Links

User manual
Code: PFM341-9CH
SWITCHING SUPPLYPFM341-9CHDAHUA
Warning!
Please read the user manual contained in this publication, as it contains important information on the safety of the installation and use of the
device.
Only people who have read the user manual can use the device.
The user manual should be kept for future reference. The device must be used only for the purposes indicated in this manual.
The device must be unpacked before commissioning. After unpacking, make sure the device is in good condition.
If the product has defects, it should not be used until it is repaired.
The product is designed for domestic and commercial use and may not be used for purposes other than those intended.
The manufacturer is not responsible for damages resulting from non-compliance with the rules contained in the user manual, therefore it is
recommended to follow the aforementioned safety instructions for the operation, use and maintenance of the device. This will ensure your
safety and prevent damage to the device.
The manufacturer and the supplier are not responsible for any damage or loss caused by the product, including economic or intangible
losses, loss of profits, income, data, enjoyment when using the product or other products related thereto.
- indirect, incidental or consequential loss or destruction. The above will apply regardless of whether the loss or destruction refers to:
1. Deterioration in quality or malfunction of the product or products related to it, due to damage, and lack of availability of the product
when it is being repaired, which has caused inactivity, loss of user time or interruption of the company's activity;
2. Inadequate performance of the product or related products;
3. This applies to losses and damages of any legal category, including negligence and other damages, avoidance of contract, express or
implied warranty and strict liability (even if the manufacturer or supplier has been notified of the possibility of such damages ).
Security measures:
In the design phase, special attention was paid to the quality standards of the device in which the most important factor is to ensure
the safety of operation.
The device must be protected from contact with corrosive, dyeing and viscous liquids.
The device is designed to resume operation when power is restored after a power failure. Turn off the device before transportation.
Before connecting the device to the mains, ensure that the supply voltage is consistent with the rated voltage specified in the user
manual.
Attention! It is recommended to use additional protection to protect the device against possible surges in the premises. Surge
protectors are effective protection against the accidental passage of higher than rated voltages through the device. The damage
caused
due to the passage of higher voltages than expected
in the manual are not covered by the warranty.
Correct disposal of the product:
The crossed out bin symbol indicates that this product should not be disposed of with other household waste throughout the EU. To avoid
possible damage to the environment or health caused by uncontrolled waste disposal, the product must be recycled, thus promoting the
sustainable use of natural resources.
To return a consumed product, use the collection and disposal system for this type of equipment or contact the establishment where you
purchased it. The product will be disposed of respecting the environment.
It is prohibited to use the device if the power cord or plug is damaged, or if the device is not working properly, has been damaged or
dropped. A damaged power cord or plug must be replaced with new ones by the manufacturer, service center personnel or a competent
person to avoid the risk of electric shock. For safety reasons, unauthorized repairs to the device should not be carried out.
The device is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, as well as by
persons with a lack of experience or skills to operate the device, unless use is supervised by a person responsible for your safety or in
accordance with the instructions given by this person.
Do not touch the plug with wet hands! To remove the plug from the outlet, pull on the plug, not the cord. The device should be used
only for the applications described in this manual. The use of accessories not recommended by the device manufacturer may cause fire,
electric shock, or injury.
The lightning bolt symbol within an equilateral triangle indicates the presence of hazardous voltage beneath the device's casing. The
voltage can be dangerous to the health and life of the user.
1/5
2020-11-27
PFM341-9CH

Advertisement

loading
Need help?

Need help?

Do you have a question about the PFM341-9CH and is the answer not in the manual?

Questions and answers

Summary of Contents for Dahua PFM341-9CH

  • Page 1 User manual Code: PFM341-9CH SWITCHING SUPPLYPFM341-9CHDAHUA Warning! Please read the user manual contained in this publication, as it contains important information on the safety of the installation and use of the device. Only people who have read the user manual can use the device.
  • Page 2 User manual Code: PFM341-9CH SWITCHING SUPPLYPFM341-9CHDAHUA The power supply has a robust and aesthetic metal casing. The power supply provides the output voltage of 12V AC and supports up to 9 devices. The maximum load of a single output is 2.5A, but it should be noted that the total load of all outputs must not exceed 5A.
  • Page 3 User manual Code: PFM341-9CH SWITCHING SUPPLYPFM341-9CHDAHUA Inside view of the casing: 2020-11-27 PFM341-9CH...
  • Page 4 User manual Code: PFM341-9CH SWITCHING SUPPLYPFM341-9CHDAHUA Closed shell power supply: View from below: 2020-11-27 PFM341-9CH...
  • Page 5 User manual Code: PFM341-9CH SWITCHING SUPPLYPFM341-9CHDAHUA Back view: Including: 2020-11-27 PFM341-9CH...