Summary of Contents for Mooreco iTeach Spider Flat Panel Cart
Page 1
Spider Flat Panel Cart Part Numbers: 37675, 37650 INSTRUCCIONES DE INSTRUCTIONS DE ASSEMBLY INSTRUCTIONS ENSEMBLAJE MONTAGE DO NOT THROW AWAY! NO LA TIRE NE PAS JETER Revised: 12 Nov 2024 Page 1 of 7...
Page 2
Parts List Hardware P1 - Front Leg A - M8 x 100mm B - M8 x 25mm Screw P2 - Back Leg C - M8 x 20mm Screw P3 - H-channel D - M6 x 35mm Screw P4 - Top Cover E - M6 x 15mm Screw P5 - Uprights F - #3 - 16 Wood Screw...
WARNINGS AND DISCLAIMERS ADVERTENCIAS Y RENUNCIAS AVERTISSEMENTS Review full assembly instructions and Previo a comenzar el proceso de Avant de commencer l’ assamblage check that all parts are present before ensamblaje favor revisar veuillez consulter instructions beginning assembly. Heavy or large instrucciones y asegurarse que cuenta con complètes et vérifier si vous avez toutes furniture may require multiple persons in...
Page 4
STEP 1 Slide H-channel (P3) into Front leg (P1) and screw together using four (4) M8 x 20mm screws (C). STEP 2 Repeat step 1 with the Back Leg (P2). Revised: 12 Nov 2024 Page 4 of 7...
Page 5
STEP 3 With both legs attached, place Top Cover (P4) over the H-channel and insert M8 x 100mm screws (A) on each side. STEP 4 Insert four Casters (G) into the legs. Revised: 12 Nov 2024 Page 5 of 7...
Page 6
STEP 5 Insert each upright (P5) into the base and screw in with six (6) washers (H) and M8 x 25mm screws (B). STEP 6 Place Shelf (P6) on the back of the uprights. Take the Shelf Bracket (P7) and wrap around the upright support. Screw #3 - 16 Wood Screws (F) through the shelf brackets to secure the shelf.
Page 7
STEP 7 Insert Cover Panel (P8) in the upright’s slots. The panel can be adjusted to different heights. STEP 8 Place mount on uprights in desired place. Once placed in the slots, secure with M6 x 15mm screws (E). To adjust, remove the screws, take mounts out of slots and move to new location and tighten the screws.
Need help?
Do you have a question about the iTeach Spider Flat Panel Cart and is the answer not in the manual?
Questions and answers