Sony SLV-M91HF - Video Cassette Recorder Setup Instructions page 6

Step 2: Setting up the remote commander (continued)
Notes
• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove
the batteries to avoid possible damage from battery leakage.
• Do not use a new battery with an old one.
• Do not use different types of batteries.
• Some Sony AV receivers may not be operated with the remote commander.
Setting the COMMAND MODE switch
To remotely control the VCR with
the remote commander, set
COMMAND MODE on the
remote commander to the same
position as that on the VCR.
Usually set to VTR 3. Change the
position as shown below to
control other Sony VCRs:
VTR 1: For Sony Betamax format VCRs
VTR 2: For Sony 8mm format VCRs
VTR 3: For Sony VHS format VCRs
To change the command mode
position of the VCR, press and
hold COMMAND MODE on the
VCR for two seconds and repeat
until the desired position appears
in the display window.
6
1 2 3
4 5 6
COMMAND MODE
STEREO SAP VIDEO LP SP EP APC EDIT
VTR
1 2 3
COMMAND
MODE
BLANK AV INSERT