sparkfun KIT-15209 Manual

Product Overview
01-27-2022
For the most up-to-date information, visit
Description
Sparkfun KIT-15209 Radio-Frequency Identification (RFID)
Qwiic Kit is a simple and comprehensive I
starting point for the ID-3LA, ID-12LA, and ID-20LA readers.
By plugging a reader into the headers and using a Qwiic cable
to connect to any Qwiic enabled development board, the
125kHz ID tag can be scanned and the unique 32-bit ID will be
shown on the screen. This kit includes an RFID Qwiic Reader,
an ID-12LA reader, a couple of RFID cards, and a cable.
By utilizing the onboard ATtiny84A, the RFID Qwiic kit takes
the 6byte ID tag of the 125kHz RFID card, attaches a time
stamp, and puts it onto a stack. This board comes with a read
LED and buzzer and a jumper to disable the buzzer if required.
Features
• Mates with three ID-XXLA RFID Modules
• ID-3LA
• ID-12LA
• ID-20LA
• 125kHz Read frequency
• Scan range of 5inches to 6inches
• Buzzer and blue LED scan indicator
• Address Jumper
Kit Contents
• 1x SparkFun RFID Qwiic Reader
• 1x RFID Reader ID-12LA (125kHz)
• 2x RFID Tag (125kHz)
• 1x Qwiic Cable - 100mm
The information contained in this document should be used as a guideline only.
RFID Qwiic Kit
KIT-15209
www.mouser.com
C based RFID
2
or the supplier's website.