HAMPTON BAY Pine View GFS30041B Use And Care Manual
  1. Manuals
  2. Brands
  3. HAMPTON BAY Manuals
  4. Lawn and Garden Equipment
  5. Pine View GFS30041B
  6. Use and care manual
HAMPTON BAY Pine View GFS30041B Use And Care Manual

HAMPTON BAY Pine View GFS30041B Use And Care Manual

10ftx10ft steel louvered pergola
Hide thumbs

Advertisement

Table of Contents

Item # 1001 889 480
Model # GFS30041B
Scan for easy 3D instructions
Tap. Zoom. Rotate
USE AND CARE GUIDE
Pine View 10ftx10ft Steel Louvered Pergola
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HOMEDEPOT.CA
THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this pergola. We strive to continually
create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Pine View GFS30041B and is the answer not in the manual?

Questions and answers

Summary of Contents for HAMPTON BAY Pine View GFS30041B

  • Page 1 THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this pergola. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.

  • Page 2: Safety Warnings

    Table of Contents........2 Pre-Assembly ........3 Safety Information .

  • Page 3: Planning Assembly

    PLANNING ASSEMBLY NOTE: More than one person may be required to assemble this product. NOTE: For safety, please use ladders and assemble on level ground. 8-Foot Ladder (Qty. 2 recommended) HARDWARE INCLUDED NOTE: Hardware not shown to actual size. Quantity Part Description 80+8...
  • Page 4 PACKAGE CONTENTS Quantity Quantity Part Description Part Description Post Louver Clip 2 Front And Rear Beam Post Cap Left Beam Post Base Right Beam Post Base Cover Louver Turbine Sleeve Cover Plate Crank 40+4 Connector Bar 1 Shaft Sleeve Clip 40+4 Connector Bar 2 Fixed Component...
  • Page 5 Attaching the Post Base Cover and the Post Base to the Post Insert the post base cover (J1) into the post (A) from the bottom. Attach the post (A) to the post base (J) using the M6x15 combination bolts (BB). Fully tighten the bolts using the big hex wrench (LL).
  • Page 6 Attaching the Front and Rear Beam to the Posts Insert the bolt on the front and rear beam (B) into the post (A) through the keyhole and lock the bolt in place. Attach the tab (O) to the bolt on the front and rear beam (B) using the M8x25 combination hex bolts (GG). Fix the M8x25 combination hex bolts (GG) clockwise using the ratchet wrench (NN).
  • Page 7 Attaching the Connector Bar 1 to the Right Beam Attach the connector bar 1 (F1) to the right beam (B2) using the M6x15 bolt (HH). Fully tighten the bolt using the big hex wrench (LL). HOMEDEPOT.CA Please contact 1-855-HD-HAMPTON for further assistance.
  • Page 8 Attaching the Right Beam to the Posts and the Front and Rear Beams Insert the bolt on the right beam (B2) into the post (A) and the front and rear beam (B) through the keyhole and lock the bolt in place. Attached the tab (O) to the bolt on the right beam (B2) using the M8x25 combination hex bolt (GG).
  • Page 9 Attaching the Left Beam to the Posts and the Front and Rear Beams Insert the bolt on the left beam (B1) into the post (A) and the front and rear beam (B) through the keyhole and lock the bolt in place. Attached the tab (O) to the bolt on the left beam (B1) using the M8x25 combination hex bolt (GG).
  • Page 10 Attaching the Post Cap to the Post, the Front and Rear Beam and the Left & Right Beams Attach the post cap (H) to the post (A), the front and rear beam (B) and the left beam (B1) using the M6x15 combination bolts (BB) and the M6x25 combination bolt (CC).
  • Page 11 Gluing the Joint Between the Beams and the Posts Glue the joint between the front and rear beam (B), the left beam (B1) and the post (A). Repeat this step for the other front and rear beam (B), the right beam (B2) and the three posts (A). NOTE: The silicone glue is not included and purchased by the customer to avoid leaking at the joints after use.
  • Page 12 Attaching the Louver Clips to the Louver Check the pre-assembled bolts on the louver clips (G&G1) are tightened, if not tightened, fully tighten the bolts using the small hex wrench (KK). Attach the louver clip 1 (G) to the one end of the louver (C) using the M6x12 combination bolts (AA). Attach the louver clip 2 (G1) to the other end of the louver (C) using the M6x12 combination bolts (AA).
  • Page 13 Attaching the Louvers to the Left Beam and the Right Beam Insert the louver clips (G&G1) on the louver (C) into the holes on the left & right beams (B1&B2), and stuck rmly. Attach the shaft sleeve clips (M) to the louver clips (G&G1) and the left & right beams (B1&B2) as shown below. Repeat this step for the other louvers (C).
  • Page 14 Attaching the Connector Bars to the Louver Clips Put the connector bar 2 (F2) to the left beam (B1). Align the holes between the connector bar 2 (F2) and louver clip 1 (G), and x the connector bar 2 (F2) and the louver clip 1 (G) using the xed components (N).
  • Page 15 Attaching the Turbine Sleeve to the Turbine Component on the Right Beam Attach the turbine sleeve (K) to the turbine component on the right beam (B2) using the M5x18 countersunk bolt (DD). Fully tighten the bolt using the screwdriver (PP). HOMEDEPOT.CA Please contact 1-855-HD-HAMPTON...
  • Page 16 Attaching the Crank to the Turbine Sleeve Attach the crank (L) to the turbine sleeve (K) by rotating counter-clockwise.
  • Page 17 Attaching the Cover Plate to the Front and Rear Beam Attach the cover plate (D) to the front and rear beam (B) using the M5x15 bolts (EE). Fully tighten the bolts using the big hex wrench (LL). HOMEDEPOT.CA Please contact 1-855-HD-HAMPTON for further assistance.
  • Page 18 Attaching the Cover Plate to the Other Front and Rear Beam Attach the cover plate (D) to the other front and rear beam (B) using the M5x15 bolts (EE). Fully tighten the bolts using the big hex wrench (LL).
  • Page 19 Stabilizing the Louvered Pergola Drill the holes with a diameter of 10mm and a depth of 70mm through the holes of the post base (J). Insert the expansion screws (FF) through the holes of the post base (J) into the ground with a hammer or mallet. Fully tighten the expansion screws (FF) using the wrench (MM).
  • Page 20 For best results, clean the pergola with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that may accumulate. Do not clean with abrasive materials, bleach, or solvents. Keep the pergola out of fire, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or wind.
  • Page 21 1-855-HD-HAMPTON HOMEDEPOT.CA...

This manual is also suitable for:

1001 889 480

Table of Contents