Download Print this page

Micro Matic EBC300 PLUS Manual

Heavy duty line cleaning machine

Advertisement

Quick Links

RULES FOR SAFE OPERATION
Safety precautions are essential when any electrical or mechanical equipment is involved. These
precautions are neces sary when using, storing, and servicing electromechanical equipment.
Using this equipment with the respect and cau tion demanded will considerably lessen the
possibilities of personal injury. If safety precautions are overlooked or ig nored, personal injury or
property damage may occur.
This unit was designed for specific applications. It should not be modified and / or used for any
application other than those for which it was designed. If there are any questions regarding its
application or technical assistance call 1-866-327-4159.
Read this manual carefully - know your equipment. Consider the application, limitations and the
po tential hazards specific to your unit.
1.
Read this manual carefully - know your equipment. Consider the application, limitations and
the po tential hazards specific to your unit.
2.
Only use a three wire extension cord, with grounded prong. Use a portable plug GFCI device,
a 3-prong power cord with a GFCI device or a GFCI equipped outlet to protect from ground
fault shock.
3.
Do not touch pug or outlet with wet hands.
4.
Avoid accidental starts. Turn switch "off' before connecting or disconnecting cord at
electrical outlets.
5.
Water spray must never be directed toward any electrical wiring or directly toward the machine
itself or fatal electric shock may occur.
6.
Never carry unit by the cord or hoses. Do not pull on cord to disconnect from outlet.
7.
To prevent damage, the cord should not be crushed, placed next to sharp objects or near heat.
8.
Check power cords before using. Damaged cords can reduce performance or cause a fatal
electric shock.
9.
Never allow children to operate this equipment.
10. Wear safety glasses and / or goggles while operating.
11. Disconnect power plug form the oudet when not in use and prior to the detaching of the
cleaning hose.
12. Prior to starting in cold weather, be sure ice has not formed in any part of the equipment.
13. To allow free air circulation, the unit should not be covered during operation.
Heavy Duty Line Cleaning Machine
EBC300 PLUS

Advertisement

loading
Need help?

Need help?

Do you have a question about the EBC300 PLUS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Micro Matic EBC300 PLUS

  • Page 1 Heavy Duty Line Cleaning Machine EBC300 PLUS RULES FOR SAFE OPERATION Safety precautions are essential when any electrical or mechanical equipment is involved. These precautions are neces sary when using, storing, and servicing electromechanical equipment. Using this equipment with the respect and cau tion demanded will considerably lessen the possibilities of personal injury.
  • Page 2 PUMP PRIMING INSTRUCTIONS 1. The red handle of the Flow Valve (located on the front of the machine) must be in the closed position, with the handle perpindicular to the hose. 2. the inline filter must be clean and free of foreign material. 3.
  • Page 3 Reposition the screen into the clear bowl and reassemble to fitler cap. -You are now ready to resume cleaning! Note: DO NOT OPERATE your EBC300 Plus Line Cleaning Pump without the filter screen clean and properly installed. This will VOID THE WARRANTY! New filter elements may be purchased through customer service.
  • Page 4 TIMER PROGRAMING...